Use the same procedure for LHD and RHD vehicles.
The procedure listed below is for LHD vehicles.
Use the same procedure for the RH side and LH side.
The procedure listed below is for the LH side.
69298A
1.REMOVE NO. 2 DOOR INSIDE HANDLE BEZEL LH
74611C
2.REMOVE ASSIST GRIP COVER LH
67604
3.REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH
68174A
4.REMOVE REAR DOOR INNER GLASS WEATHERSTRIP LH
81080G
5.REMOVE REAR DOOR INSIDE HANDLE ILLUMINATION LIGHT ASSEMBLY LH
|
Protective Tape |
Disconnect the connector.
Using a screwdriver, detach the claw and remove the rear inside handle illumination light assembly LH.
Tape the screwdriver tip before use.
81080J
6.REMOVE NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY
|
Remove in this Direction |
|
Connector |
Disconnect the connector.
Turn the No. 1 interior illumination light assembly in the direction indicated by the arrow and remove it.