Use the same procedure for LHD and RHD vehicles.
The procedure listed below is for LHD vehicles.
Use the same procedure for the RH side and LH side.
The procedure listed below is for the LH side.
81080G
1.INSTALL REAR DOOR INSIDE HANDLE ILLUMINATION LIGHT ASSEMBLY LH
Connect the connector.
Attach the claw to install the rear door inside handle illumination light assembly LH.
81080J
2.INSTALL NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY
|
Install in this Direction |
|
Connector |
Turn the No. 1 interior illumination light assembly in the direction indicated by the arrow to install it.
Connect the connector.
68174A
3.INSTALL REAR DOOR INNER GLASS WEATHERSTRIP LH
67604
4.INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH
74611C
5.INSTALL ASSIST GRIP COVER LH
69298A
6.INSTALL NO. 2 DOOR INSIDE HANDLE BEZEL LH