Home › Vehicle Interior › METER / GAUGE / DISPLAY › TRIP SWITCH › from 2017.08
RM27T0E _58 Vehicle Interior _053733 METER / GAUGE / DISPLAY _0261083 TRIP SWITCH A

METER / GAUGE / DISPLAY  TRIP SWITCH  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 84975 1.INSTALL TRIP SWITCH

a.

Attach the 2 claws to install the trip switch.


Hide 55404D 2.INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

Hide 55480D 3.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

Hide 55476C 4.INSTALL INSTRUMENT PANEL FINISH PLATE GARNISH (for RHD)

Hide 55471A 5.INSTALL INSTRUMENT CLUSTER FINISH PANEL ORNAMENT (for LHD)

Hide 6.RESTORE AUTOAWAY/RETURN FUNCTION (for Power Tilt and Power Telescopic Steering Column)

a.

Restore the Autoaway/Return function setting to the previous condition by changing the customize parameter.

Click hereSteering>STEERING COLUMN>POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM>CUSTOMIZE PARAMETERS