Home › Vehicle Interior › MIRROR (INT) › INNER REAR VIEW MIRROR › from 2017.08
RM27T0E _58 Vehicle Interior _053734 MIRROR (INT) _0261085 INNER REAR VIEW MIRROR A

MIRROR (INT)  INNER REAR VIEW MIRROR  INSTALLATION  


PROCEDURE

Hide 87810 1.INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/o Pre-crash Safety System)

a.

w/o EC Mirror:

i.
B490335C01
0,0 0,0 false
V100135

"TORX" screw
V100136

Install in this Direction


Slide and temporarily install the inner rear view mirror assembly as shown in the illustration.


ii.

Using a T20 ''TORX'' socket wrench, install the inner rear view mirror assembly with the "TORX" screw.

Torque:
1.5 N*m (15 kgf*cm, 13 in.*lbf)



b.

w/ EC Mirror:

i.
B486267C01
0,0 0,0 false
V100135

Connector
V100136

Install in this Direction


Slide and temporarily install the inner rear view mirror assembly as shown in the illustration.


ii.

Using a T20 "TORX" socket wrench, install the inner rear view mirror assembly with the "TORX" screw.

Torque:
1.5 N*m (15 kgf*cm, 13 in.*lbf)


iii.

Connect the connector.



Hide 87834 2.INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/o Pre-crash Safety System, w/ EC Mirror)

a.

Attach the claw and temporarily install the inner rear view mirror stay holder cover.


b.
B426720

Slide the inner rear view mirror stay holder cover in the direction indicated by the arrow shown in the illustration and attach the 2 claws to install the inner rear view mirror stay holder cover.


Hide 87810 3.INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/ Pre-crash Safety System)

a.

w/o EC Mirror:

i.
B490334C01
0,0 0,0 false
V100135

"TORX" screw
V100136

Install in this Direction


Slide and temporarily install the inner rear view mirror assembly as shown in the illustration.


ii.

Using a T20 ''TORX'' socket wrench, install the inner rear view mirror assembly with the "TORX" screw.

Torque:
1.5 N*m (15 kgf*cm, 13 in.*lbf)



b.

w/ EC Mirror:

i.
B486268

Slide and temporarily install the inner rear view mirror assembly as shown in the illustration.


ii.

Using a T20 ''TORX'' socket wrench, install the inner rear view mirror assembly with the "TORX" screw.

Torque:
1.5 N*m (15 kgf*cm, 13 in.*lbf)


iii.
B426728

Attach the clamp.


iv.

Connect the connector.



Hide 86466D 4.INSTALL NO. 1 FORWARD RECOGNITION COVER (w/ Pre-crash Safety System)

Hide 86466E 5.INSTALL NO. 2 FORWARD RECOGNITION COVER (w/ Pre-crash Safety System)