Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
52159
1.REMOVE REAR BUMPER COVER
81560
2.REMOVE REAR COMBINATION LIGHT ASSEMBLY LH
|
Protective Tape |
Apply protective tape as shown in the illustration.
Remove the 2 bolts.
| *a | Wire Harness Clamp |
| *b | Pin |
| *c | Guide |
Detach the wire harness clamp.
Pull the rear combination light assembly LH toward the rear of the vehicle to detach the guide, 2 pins and clip to remove it.
Disconnect the connector.