The headlight leveling motor receives a signal from the No. 1 headlight ECU sub-assembly to operate. The No. 1 headlight ECU sub-assembly receives a signal indicating the operating conditions of the headlight leveling motor. The No. 1 headlight ECU sub-assembly LH stores DTC B2417 and B2418.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Note |
|---|---|---|---|---|
| B2417 | Headlight Beam Level Control Motor LH Malfunction | Malfunction in headlight leveling motor LH | Headlight leveling motor LH | - |
| B2418 | Headlight Beam Level Control Motor RH Malfunction | Malfunction in headlight leveling motor RH | Headlight leveling motor RH | - |
Clear the DTCs.
Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM (for LED Headlight)>DTC CHECK / CLEAR
Turn the ignition switch to ON.
Check for DTCs.
Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM (for LED Headlight)>DTC CHECK / CLEAR
DTC B2417 and B2418 are not output.
| Result | Proceed to |
|---|---|
| OK | A |
| NG (DTC B2417 is output) | B |
| NG (DTC B2418 is output) | C |
A
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
B
C