Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM (for LED Headlight) › from 2017.08
RM27T0E _59 Vehicle Exterior _053747 LIGHTING (EXT) _0326212 LIGHTING SYSTEM(for LED Headlight) C

LIGHTING (EXT)  LIGHTING SYSTEM(for LED Headlight)  B2450  Initialization has not been Performed  


DESCRIPTION

The No. 1 headlight ECU sub-assembly LH stores this DTC if initialization has not been performed after the ECU was replaced.

DTC No. Detection Item DTC Detection Condition Trouble Area Note
B2450 Initialization has not been Performed Initialization of the No. 1 headlight ECU sub-assembly LH has not been performed No. 1 headlight ECU sub-assembly LH w/o Air Suspension System

CAUTION / NOTICE / HINT

NOTICE:

If the No. 1 headlight ECU sub-assembly LH has been replaced, it is necessary to synchronize the vehicle information and initialize the No. 1 headlight ECU sub-assembly LH.

Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM (for LED Headlight)>REGISTRATION


PROCEDURE

1.PERFORM INITIALIZATION
a.

Perform initialization of the No. 1 headlight ECU sub-assembly LH.

Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM (for LED Headlight)>REGISTRATION


Result:
Proceed to
NEXT



NEXT

2.CHECK FOR DTC
2.CHECK FOR DTC
a.

Turn the ignition switch to ON.


b.

Check for DTCs.

Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM (for LED Headlight)>DTC CHECK / CLEAR

OK:

DTC B2450 is not output.


HINT:

If the No. 1 headlight ECU sub-assembly LH stores DTC B2450 even though the ECU has been initialized, the No. 1 headlight ECU sub-assembly LH may be malfunctioning.



Result:
Proceed to
OK
NG



OK

END (INITIALIZATION WAS NOT COMPLETED)

NG

REPLACE NO. 1 HEADLIGHT ECU SUB-ASSEMBLY LH