Home › Vehicle Exterior › DOOR / HATCH › HOOD LOCK CONTROL CABLE ASSEMBLY › from 2017.08
RM27T0E _59 Vehicle Exterior _053744 DOOR / HATCH _0261246 HOOD LOCK CONTROL CABLE ASSEMBLY A

DOOR / HATCH  HOOD LOCK CONTROL CABLE ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:

A bolt without a torque specification is shown in the standard bolt chart.

Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS


PROCEDURE

Hide 53630 1.INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY (for LHD)

a.

Pass the hood lock control cable assembly into the engine compartment.


b.

Pass the cable through the upper radiator support.


c.

Attach the clamps as shown in the illustration.

B494762C01
0.552,1.688 0.74,1.688 false 0.792,1.969 0.938,1.688 0.938,1.688 1.083,1.688 false 2.406,1.938 2.531,1.688 2.531,1.688 2.677,1.688 false 1.719,2.333 1.719,2.125 1.719,2.125 1.938,1.906 false 4.813,0.573 4.948,0.573 4.948,0.573 5.083,0.792 true 6.094,1.177 6.177,1.177 6.177,1.177 6.313,1.396 false 6.417,2.552 6.531,2.552 6.531,2.552 6.667,2.771 true 1.438,1.313 1.802,1.51 0.365,0.198 12 false *A 0.375,1.604 0.615,1.75 0.24,0.146 10 false *1 2.698,1.594 3.01,1.75 0.313,0.156 10 false *1 1.125,1.594 1.438,1.75 0.313,0.156 10 false *2 1.667,2.375 1.979,2.531 0.313,0.156 10 false *2 4.646,0.49 4.958,0.646 0.313,0.156 10 false *1 5.927,1.094 6.24,1.25 0.313,0.156 10 false *1 6.208,2.458 6.521,2.615 0.313,0.156 10 false *1
*A for Engine Room Side - -
*1 Hood Lock Control Cable Assembly *2 Stopper



Hide 53630 2.INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY (for RHD)

a.

Pass the hood lock control cable assembly into the engine compartment.


b.

Pass the cable through the upper radiator support.


c.

Attach the clamps as shown in the illustration.

U169727C02
4.583,1.75 4.75,1.75 4.75,1.75 4.917,1.917 true 6,2 6,1.844 true 6.667,2.25 6.667,2.042 true 5.125,1.667 5,1.667 true 2.281,0.833 2.281,1 true 0.917,0.833 0.917,1 true 0.948,2.042 0.948,2.219 true 1.5,3.25 1.313,3.302 1.313,3.302 1.313,3.396 true 2.208,0.885 2.125,1 2.125,1 1.917,1 true 0.865,2.094 0.781,2.24 0.781,2.24 0.583,2.24 true 0.927,0.708 1,0.583 1,0.583 1.083,0.583 true 2.198,1 2.417,1.188 0.219,0.188 10 false *1 1.75,0.917 1.969,1.104 0.219,0.188 10 false *3 0.833,1 1.01,1.167 0.177,0.167 10 false *1 0.896,2.229 1.073,2.385 0.177,0.156 10 false *1 1.25,3.417 1.469,3.688 0.219,0.271 10 false *1 4.448,1.667 4.667,1.938 0.219,0.271 10 false *2 6.615,2.25 6.833,2.521 0.219,0.271 10 false *1 5.167,1.583 5.385,1.854 0.219,0.271 10 false *1 5.948,2 6.167,2.271 0.219,0.271 10 false *2 5.521,1.323 5.75,1.531 0.229,0.208 10 false *A 0.417,2.167 0.635,2.354 0.219,0.188 10 false *3 1.115,0.5 1.333,0.688 0.219,0.188 10 false *3
*A for Engine Room Side - -
*1 Hood Lock Control Cable Assembly *2 Stopper



Hide 53601 3.INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

a.

for LHD:

i.
B238482

Connect the hood lock control cable assembly to the hood lock control lever sub-assembly.


ii.
B246507

Attach the 3 claws to install the hood lock control lever sub-assembly.


iii.
B487090C01
0.26,1.448 0.573,1.448 0.573,1.448 1.094,1.104 true 1,0.792 1.219,0.573 true 0.885,1.979 1.25,1.698 true 0.854,1.542 1.146,1.26 true 0.063,1.375 0.24,1.542 0.177,0.167 10 false *1 1.25,0.469 1.563,0.625 0.313,0.156 10 false *2 0.708,1.917 1.021,2.073 0.313,0.156 10 false *3 0.781,1.563 1.094,1.719 0.313,0.156 10 false *4
*1 Protector
*2 Fuel Lid Lock Control Cable
*3 Hood Lock Control Cable
*4 Clamp


Attach the clamps as shown in the illustration.



b.

for RHD:

i.
B238482

Connect the hood lock control cable assembly to install the hood lock control lever sub-assembly.


ii.
B238481

Attach the 3 claws and install the hood lock control lever sub-assembly.



Hide 53510 4.INSTALL HOOD LOCK ASSEMBLY (for LHD)

a.
B487091

Apply MP grease to the sliding areas of the hood lock assembly.


b.
B487087C01
0.167,0.156 0.469,0.375 0.302,0.219 12 true *A
*A w/ Engine Hood Courtesy Switch


Connect the hood lock control cable assembly.


c.

w/ Engine Hood Courtesy Switch:

Connect the connector.


d.
B487092

Install the hood lock assembly with the 3 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


Hide 53510 5.INSTALL HOOD LOCK ASSEMBLY (for RHD)

a.
B487093

Apply MP grease to the sliding areas of the hood lock assembly.


b.
B487089C01
2.26,0.177 2.594,0.406 0.333,0.229 12 false *A
*A w/ Engine Hood Courtesy Switch


Connect the hood lock control cable assembly.


c.

w/ Engine Hood Courtesy Switch:

Connect the connector.


d.
B487088

Install the hood lock assembly with the 3 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


Hide 53629 6.INSTALL HOOD LOCK CONTROL CABLE COVER

a.
B241650C01
0.042,0.031 0.333,0.271 0.292,0.24 12 false *A 0.031,2.24 0.365,2.49 0.333,0.25 12 false *B
*A for LHD
*B for RHD


Pass the hood lock control cable assembly through the hood lock control cable cover.


b.

Attach the claw to install the hood lock control cable cover.


c.

Install the 2 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


Hide 86520 7.INSTALL LOW PITCHED HORN ASSEMBLY (for LHD)

Hide 86510 8.INSTALL HIGH PITCHED HORN ASSEMBLY (for LHD)

Hide 53525 9.INSTALL HOOD LOCK RELEASE LEVER PROTECTOR

a.

Attach the 2 claws and 2 guides to install the hood lock release lever protector.


Hide 53292A 11.INSTALL UPPER RADIATOR SUPPORT SEAL