Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL BATTERY (for RHD) › 2017.08–2020.08
RM27T0E _58 Vehicle Interior _053730 DOOR LOCK _0326328 DOOR CONTROL BATTERY(for RHD) A

DOOR LOCK  DOOR CONTROL BATTERY(for RHD)  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.


NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 8598A 4.REMOVE DOOR CONTROL BATTERY

a.
B487077C01
0,0 0,0 false
V100135

Nut
V100136

Connector


Remove the 2 nuts and door control battery.


b.

Disconnect the connector.