Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
85035
1.INSTALL WASHER NOZZLE SUB-ASSEMBLY
w/o Heater Nozzle:
Install a new washer nozzle sub-assembly to the washer hose.
Attach the 2 claws to install the washer nozzle sub-assembly.
w/ Heater Nozzle:
Connect a new washer nozzle sub-assembly to the washer hose.
If the washer nozzle sub-assembly has been dropped , replace it with a new one.
Connect the connector.
Attach the 2 claws to install the washer nozzle sub-assembly.
53341B
2.INSTALL HOOD INSULATOR (w/ Heater Nozzle)
85035
3.INSPECT WASHER NOZZLE SUB-ASSEMBLY
85035
4.ADJUST WASHER NOZZLE SUB-ASSEMBLY