Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
84010A
1.REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY
55436A
2.REMOVE INSTRUMENT PANEL FINISH PANEL END LH
55449C
3.REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION
55435A
4.REMOVE INSTRUMENT PANEL FINISH PANEL END RH
55448A
5.REMOVE NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION
Use the same procedure described for the No. 2 instrument panel finish panel cushion.
58805E
6.REMOVE LOWER CONSOLE PANEL SUB-ASSEMBLY
Detach the 10 clips.
Disconnect each connector and remove the lower console panel sub-assembly.
55606
7.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
for LHD:
Remove the screw.
Detach the 2 clips and 2 guides and remove the No. 1 instrument panel under cover sub-assembly.
for RHD:
Remove the screw.
Detach the 3 clips and 2 guides and remove the No. 1 instrument panel under cover sub-assembly.
58816B
8.REMOVE CONSOLE BOX INSERT
Detach the 2 clips and guide and remove the console box insert.
55607
9.REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Remove the screw.
Detach the 3 clips and 2 guides and remove the No. 2 instrument panel under cover sub-assembly.
| *A | for LHD | *B | for RHD |
58817A
10.REMOVE FRONT NO. 2 CONSOLE BOX INSERT
Detach the 2 clips and guide and remove the front No. 2 console box insert.
58821C
11.REMOVE UPPER CONSOLE PANEL
Remove the 2 screws.
Detach the 2 clips and remove the upper console panel.
Disconnect the connector and detach the clamp.
58910C
12.REMOVE REAR CONSOLE BOX ASSEMBLY
Remove the 2 screws, 2 bolts and rear console box assembly.