Home › Vehicle Interior › INTERIOR PANELS / TRIM › FRONT CONSOLE BOX(for Bench Seat Type) › from 2017.08
RM27T0E _58 Vehicle Interior _053741 INTERIOR PANELS / TRIM _0261220 FRONT CONSOLE BOX(for Bench Seat Type) A

INTERIOR PANELS / TRIM  FRONT CONSOLE BOX(for Bench Seat Type)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.

·

A bolt without a torque specification is shown in the standard bolt chart.

Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS



PROCEDURE

Hide 58910C 1.INSTALL REAR CONSOLE BOX ASSEMBLY

a.

Install the rear console box assembly with the 2 screws and 2 bolts.


Hide 58821C 2.INSTALL UPPER CONSOLE PANEL

a.

Connect the connector and attach the clamp.


b.

Attach the 2 clips to install the upper console panel.


c.

Install the 2 screws.


Hide 58817A 3.INSTALL FRONT NO. 2 CONSOLE BOX INSERT

a.

Attach the 2 clips and guide to install the front No. 2 console box insert.


Hide 55607 4.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

a.

Attach the 3 clips and 2 guides to install the No. 2 instrument panel under cover sub-assembly.


b.

Install the screw.

B298555C05
3.667,0.156 3.969,0.479 0.302,0.323 12 false *B 0.406,0.125 0.698,0.365 0.292,0.24 12 false *A
*A for LHD *B for RHD



Hide 58816B 5.INSTALL CONSOLE BOX INSERT

a.

Attach the 2 clips and guide to install the console box insert.


Hide 55606 6.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

a.

for LHD:

i.

Attach the 2 clips and 2 guides to install the No. 1 instrument panel under cover sub-assembly.


ii.

Install the screw.



b.

for RHD:

i.

Attach the 3 clips and 2 guides to install the No. 1 instrument panel under cover sub-assembly.


ii.

Install the screw.



Hide 58805E 7.INSTALL LOWER CONSOLE PANEL SUB-ASSEMBLY

a.

Connect each connector.


b.

Attach the 10 clips to install the lower console panel sub-assembly.


Hide 55449C 8.INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

Hide 55436A 9.INSTALL INSTRUMENT PANEL FINISH PANEL END LH

Hide 55448A 10.INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

HINT:

Use the same procedure described for the No. 2 instrument panel finish panel cushion.


Hide 55435A 11.INSTALL INSTRUMENT PANEL FINISH PANEL END RH

Hide 84010A 12.INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY