Do not disconnect the hoses indicated in the illustration.
for Automatic Transmission:
Perform "Inspection After Repairs" after replacing the fuel pump.
Click hereEngine / Hybrid System>1GR-FE (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION
23070
1.INSTALL FUEL MAIN VALVE ASSEMBLY
Apply a light coat of gasoline to 2 new O-rings and install the O-ring to the fuel main valve.
| *1 | New O-Ring |
Install the fuel main valve to the fuel filter case.
Make sure the O-rings are not cut or pinched during installation.
23221
2.INSTALL FUEL PUMP
for Automatic Transmission:
Perform "Inspection After Repairs" after replacing the fuel pump.
Click hereEngine / Hybrid System>1GR-FE (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION
Connect the fuel pump wire harness connector to the fuel pump.
Apply a light coat of gasoline to a new O-ring. Then install the fuel pump spacer and O-ring to the fuel pump.
| *1 | New O-Ring |
| *2 | Fuel Pump Spacer |
Attach the 5 claws to the claw holes to install the fuel pump to the fuel filter case.
| *1 | Fuel Filter Case |
77131C
3.INSTALL NO. 1 FUEL SUB-TANK
Attach the 3 claws to the claw holes to install the No. 1 fuel sub-tank.
Attach the 3 claws to the claw holes.
Connect the jet pump labeled B to the No. 1 fuel sub-tank.
Attach the claw on the end of the tube to the claw hole.
| *1 | Jet Pump A |
| *2 | Jet Pump B |
Connect the jet pump labeled A to the No. 1 fuel sub-tank.
Connect the fuel pump connector.
83320
4.INSTALL FUEL SENDER GAUGE ASSEMBLY