Home › Engine / Hybrid System › 1GR-FE (FUEL) › FUEL SENDER GAUGE ASSEMBLY (for Double Tank Type) › from 2017.08
RM27T0E _51 Engine / Hybrid System _053667 1GR-FE FUEL _0260551 FUEL SENDER GAUGE ASSEMBLY(for Double Tank Type) A

1GR-FE FUEL  FUEL SENDER GAUGE ASSEMBLY(for Double Tank Type)  INSTALLATION  


PROCEDURE

Hide 83320 1.INSTALL FUEL SENDER GAUGE ASSEMBLY (for Fuel Main Tank)

a.
A407826C01
0.302,0.875 0.615,0.875 true 0.094,0.781 0.333,0.969 0.24,0.188 10 false *1
*1 No. 1 Fuel Sub-Tank
V100135

Slide


Set the fuel sender gauge assembly on the No. 1 fuel sub-tank. Then slide the fuel sender gauge assembly downward to install it.


b.

Connect the fuel sender gauge connector.


Hide 83320B 2.INSTALL FUEL SENDER GAUGE ASSEMBLY (for Fuel Sub Tank)

a.
A410386C02
1.427,0.813 2.563,0.813 true 2.375,2.24 2.729,2.531 false 2.74,2.063 2.385,2.24 false 2.604,0.708 2.917,0.865 0.313,0.156 10 false *1 2.229,2.146 2.542,2.302 0.313,0.156 10 false A
*1 Fuel Gauge Support
V100135

Slide


Set the fuel sender gauge assembly on the fuel gauge support. Then slide the fuel sender gauge assembly upward to install it.

NOTICE:

Make sure the part labeled A in the illustration is securely inserted into the hole of the fuel gauge support before sliding the fuel sender gauge assembly downward.



b.
A410382C02
2.552,1.26 2.781,1.542 2.781,1.542 2.958,1.542 true 0.833,1.406 1.031,1.406 1.031,1.406 2.021,1.198 true 2.49,1.948 2.49,1.76 2.49,1.76 2.271,1.26 true 2.99,1.448 3.302,1.604 0.313,0.156 10 false *a 2.427,1.958 2.74,2.115 0.313,0.156 10 false *b 0.667,1.313 0.979,1.469 0.313,0.156 10 false *c
*a Lead Wire (Green)
*b Lead Wire (Black)
*c Lead Wire (Red)


Install the 3 lead wires with the 3 screws.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)

NOTICE:

Be sure to install the lead wires in the correct locations according to their color as shown in the illustration.



Hide 77020A 3.INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY (for Fuel Main Tank)

a.

Install the fuel suction with pump and gauge tube assembly.

Click hereEngine / Hybrid System>1GR-FE (FUEL)>FUEL PUMP (for Double Tank Type)>INSTALLATION


Hide 77010 4.INSTALL FUEL TANK VENT TUBE ASSEMBLY (for Fuel Sub Tank)

a.

Install the fuel tank vent tube assembly.

Click hereEngine / Hybrid System>1GR-FE (FUEL)>FUEL SUB TANK>INSTALLATION