Home › Engine / Hybrid System › 2TR-FE (FUEL) › FUEL SENDER GAUGE ASSEMBLY (for Single Tank Type) › from 2017.08
RM27T0E _51 Engine / Hybrid System _053666 2TR-FE FUEL _0260537 FUEL SENDER GAUGE ASSEMBLY(for Single Tank Type) A

2TR-FE FUEL  FUEL SENDER GAUGE ASSEMBLY(for Single Tank Type)  REMOVAL  


PROCEDURE

Hide 77020A 1.REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY (for 5 Door)

Hide 58574A 2.REMOVE REAR FLOOR MAT SUPPORT PLATE (for 3 Door)

Hide 58325E 3.REMOVE REAR FLOOR SERVICE HOLE COVER (for 3 Door)

HINT:

Fold back the floor mat so that the rear floor service hole cover can be removed.


a.
A220855

Remove the 3 screws and rear floor service hole cover.


Hide 83320 4.REMOVE FUEL SENDER GAUGE ASSEMBLY (for 5 Door)

a.
A228316

Disconnect the fuel sender gauge assembly connector.


b.
A407821C01
0,0 0,0 false
V100135

Slide


Detach the claw and slide the fuel sender gauge assembly upward to remove it.


Hide 83320B 5.REMOVE FUEL SENDER GAUGE ASSEMBLY (for 3 Door)

a.
A223161

Disconnect the fuel sender gauge assembly connector and fuel pump connector.


b.

Remove the 5 screws and fuel sender gauge assembly.


c.

Remove the gasket from the fuel sender gauge assembly.