Home › Engine / Hybrid System › 1GD-FTV (EMISSION CONTROL) › EGR VALVE › 2017.08–2018.06
RM27T0E _51 Engine / Hybrid System _053675 1GD-FTV EMISSION CONTROL _0260627 EGR VALVE A

1GD-FTV EMISSION CONTROL  EGR VALVE  REMOVAL  


PROCEDURE

Hide 26100G 2.REMOVE DIESEL THROTTLE BODY ASSEMBLY

Hide 87209 3.REMOVE WATER HOSE SUB-ASSEMBLY

a.

w/ Rear Air Conditioning System:

i.
A355502

Slide the 2 clamps and disconnect the 2 water hoses from the water pipe.


ii.

Slide the 2 clamps and disconnect the 2 water hoses from the air conditioning unit assembly.


iii.

Slide the 2 clamps and disconnect the 2 water hoses from the No. 2 water by-pass pipe.



b.

w/o Rear Air Conditioning System:

i.
A355501

Slide the 2 clamps and disconnect the 2 water hoses from the air conditioning unit assembly.


ii.

Slide the 2 clamps and disconnect the 2 water hoses from the No. 2 water by-pass pipe.



Hide 16278 4.REMOVE NO. 2 WATER BY-PASS PIPE

a.
A355503

Slide the clamp and disconnect the No. 13 water by-pass hose from the water outlet sub-assembly.


b.

Slide the clamp and disconnect the No. 15 water by-pass hose from the water by-pass pipe.


c.

Slide the clamp and disconnect the No. 16 water by-pass hose from the No. 1 EGR cooler.


d.

Remove the 3 bolts and No. 2 water by-pass pipe from the cylinder head cover sub-assembly, No. 3 water by-pass pipe sub-assembly and No. 2 engine cover bracket.


Hide 23265C 5.REMOVE GAS FILTER

a.
A352123

Disconnect the 2 vacuum hoses from the turbo pressure sensor and intake manifold.


b.

Remove the gas filter from the gas filter bracket.


Hide 89421C 6.REMOVE DIESEL TURBO PRESSURE SENSOR

a.
A352124

Disconnect the connector from the turbo pressure sensor.


b.

Remove the bolt and turbo pressure sensor from the No. 3 water by-pass pipe sub-assembly.


Hide 12633 7.REMOVE NO. 3 ENGINE COVER BRACKET

a.

Remove the 2 bolts and No. 3 engine cover bracket from the engine cover bracket and No. 2 engine cover bracket.


Hide 12632 8.REMOVE NO. 2 ENGINE COVER BRACKET

a.
A352125

Remove the 2 bolts and No. 2 engine cover bracket from the No. 3 water by-pass pipe sub-assembly and No. 2 EGR valve assembly.


Hide 77820 9.DISCONNECT UREA TANK FILLER PIPE ASSEMBLY (w/ Urea SCR System)

a.
A409328

Remove the 2 bolts and disconnect the urea tank filler pipe assembly from the No. 1 oil reservoir bracket assembly.


Hide 44306 10.DISCONNECT VANE PUMP OIL RESERVOIR SUB-ASSEMBLY

a.
A355474

Remove the 3 bolts and disconnect the vane pump oil reservoir sub-assembly from the body.


Hide 82121 11.DISCONNECT ENGINE WIRE

a.
A352128

Detach the 2 clamps and disconnect the 2 connectors from the turbocharger sub-assembly.


b.
A352129

Detach the clamp and disconnect the connector from the differential pressure sensor.


c.

Disconnect the 3 connectors from the exhaust gas temperature sensors.


d.

Disconnect the connector from the exhaust fuel addition injector assembly.


e.

Disconnect the camshaft position sensor.


f.

Disconnect the 4 connectors from the 4 injector assemblies.


g.

Disconnect the electric EGR control valve assembly.


h.

Disconnect the connector from the glow plug connector.


i.

Disconnect the connector from the sensor wire of common rail assembly.


j.

Detach the clamp and remove the bolt.


k.
A352130

Detach the clamp and disconnect the 2 connectors from the vane pump assembly.


l.

Detach the clamp and remove the bolt.


m.

Disconnect the 2 connectors from the 2 vacuum control valve sets.


Hide 25625 12.REMOVE EGR VALVE BRACKET

a.
A352140

Remove the bolt, nut and EGR valve bracket from the electric EGR control valve assembly and intake manifold.


Hide 25612 13.REMOVE NO. 2 EGR PIPE

a.
A454582

Detach the 6 clamps and disconnect the engine room main wire.


b.
A352141

Remove the bolt, 4 nuts and No. 2 EGR pipe from the electric EGR control valve assembly and intake manifold.


c.

Remove the 2 gaskets.


Hide 25800 14.REMOVE ELECTRIC EGR CONTROL VALVE ASSEMBLY

a.
A352142

Detach the clamp and disconnect the connector from the common rail assembly.


b.
A352143

Slide the clamp and disconnect the No. 9 water by-pass hose from the electric EGR control valve assembly.


c.

Remove the 2 bolts and electric EGR control valve assembly.


d.

Remove the gasket.


Hide 16206B 15.REMOVE NO. 3 WATER BY-PASS PIPE SUB-ASSEMBLY

a.
A352144

Disconnect the No. 4 fuel hose from the No. 3 water by-pass pipe sub-assembly.


b.
A352155

Slide the clamp and disconnect the No. 8 water by-pass hose from the No. 3 water by-pass pipe sub-assembly.


Hide 16209 16.DISCONNECT NO. 4 WATER BY-PASS PIPE SUB-ASSEMBLY

a.
A352156

Slide the clamp and disconnect the No. 7 water by-pass hose from the No. 1 EGR cooler.


b.

Slide the clamp and disconnect the water hose from the No. 2 EGR valve assembly.


c.

Remove the 2 bolts and disconnect the No. 4 water by-pass pipe sub-assembly from the intake manifold.


Hide 25601 17.DISCONNECT NO. 1 EGR PIPE SUB-ASSEMBLY

a.
A454583

Remove the 2 nuts and disconnect the No. 1 EGR pipe sub-assembly from the EGR valve adapter.


b.
A454584

Using an E8 "TORX" socket wrench, remove the 2 stud bolts from the No. 2 EGR valve assembly.


Hide 19.REMOVE NO. 1 EGR COOLER WITH NO. 2 EGR VALVE ASSEMBLY

a.
A454585

Remove the 4 bolts and No. 1 EGR cooler with No. 2 EGR valve assembly from the intake manifold.


b.

Remove the gasket.


Hide 25624 20.REMOVE EGR VALVE ADAPTER

a.
A454586

Remove the 2 bolts and EGR valve adapter from the No. 2 EGR valve assembly.


b.

Remove the gasket.


Hide 25630 21.REMOVE NO. 2 EGR VALVE ASSEMBLY

a.
A343908

Remove the 4 bolts and No. 2 EGR valve assembly from the No. 1 EGR cooler.


b.

Remove the gasket.


c.
A454587

Using an E8 "TORX" socket wrench, remove the 2 stud bolts from the No. 2 EGR valve assembly.