Home › Audio / Visual / Telematics › AUDIO / VIDEO › STEREO COMPONENT AMPLIFIER › 2017.08–2020.08
RM27T0E _56 Audio / Visual / Telematics _053720 AUDIO / VIDEO _0260971 STEREO COMPONENT AMPLIFIER A

AUDIO / VIDEO  STEREO COMPONENT AMPLIFIER  INSTALLATION  


PROCEDURE

Hide 86286 1.INSTALL NO. 2 AMPLIFIER BRACKET

a.

Install the No. 2 amplifier bracket with the 2 screws.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)


Hide 86285 2.INSTALL NO. 1 AMPLIFIER BRACKET

a.

Install the No. 1 amplifier bracket with the 2 screws.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)


Hide 86287C 3.INSTALL NO. 2 AMPLIFIER COVER

B359362C01
0.115,0 0.771,0.521 0.656,0.521 12 false *A 3.75,0 4.406,0.521 0.656,0.521 12 false *B
*A w/ Climate Control Seat System *B for JBL Made, w/o Climate Control Seat System


a.

w/ Climate Control Seat System:

i.

Install the No. 2 amplifier cover with the bolt and screw.

Torque:
for Bolt : 8.0 N*m (82 kgf*cm, 71 in.*lbf)


ii.

Attach the clamp.



b.

for JBL Made, w/o Climate Control Seat System:

i.

Attach the 3 clips to install the No. 2 amplifier cover.



Hide 86280 4.INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY

E374521C01
0.052,0.052 0.365,0.25 0.313,0.198 12 false *A 0.052,2.948 0.365,3.146 0.313,0.198 12 false *B 0.583,0.385 0.896,0.583 0.313,0.198 12 false *C 3.771,0.396 4.083,0.594 0.313,0.198 12 false *D 0.573,3.115 0.885,3.313 0.313,0.198 12 false *C 3.76,3.115 4.073,3.313 0.313,0.198 12 false *D
*A for Pioneer Made *B for JBL Made
*C w/ Climate Control Seat System *D w/o Climate Control Seat System


a.

Attach the guide to install the stereo component amplifier assembly.


b.

Install the bolt and 2 screws.

Torque:
w/ Climate Control Seat System Bolt : 8.0 N*m (82 kgf*cm, 71 in.*lbf)
w/o Climate Control Seat System Bolt : 4.5 N*m (46 kgf*cm, 40 in.*lbf)


c.

Connect each connector.


Hide 86287B 5.INSTALL AMPLIFIER COVER

a.

w/ Climate Control Seat System:

i.

Install the amplifier cover with the 3 clips.



b.

w/o Climate Control Seat System:

i.

Install the amplifier cover with the 3 screws and clip.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)


ii.

Attach the clamp.



c.

Return the floor carpet to its original position.


Hide 7.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION