Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
86705B
1.INSTALL TELEPHONE ANTENNA CORD SUB-ASSEMBLY
Connect the connector to install the telephone antenna cord sub-assembly.
86841
2.INSTALL NAVIGATION ECU
Insert the navigation ECU as shown in the illustration.
Install the navigation ECU with the 4 screws.
Connect the connector.
86842
3.INSTALL NO. 1 NAVIGATION WIRE
Connect each connector to install the No. 1 navigation wire.
86140A
4.INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY
84010A
5.INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY
6.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL