53112E
1.INSTALL LOWER NO. 1 RADIATOR GRILLE
Attach the 20 claws to install the lower No. 1 radiator grille.
Install the screw.
82112
2.INSTALL NO. 2 ENGINE ROOM WIRE (w/ Fog Light)
Attach the 9 clamps to install the No. 2 engine room wire.
89347B
3.INSTALL FRONT CORNER ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)
89341K
4.INSTALL FRONT CORNER ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)
89347C
5.INSTALL FRONT CENTER ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)
Use the same procedure described for the front corner ultrasonic sensor retainer.
89341L
6.INSTALL FRONT CENTER ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)
Use the same procedure described for the front corner ultrasonic sensor.
85208A
7.INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)
85207A
8.INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)
Use the same procedure described for the LH side.
85271
9.INSTALL NO. 1 HEADLIGHT CLEANER HOSE (w/ Headlight Cleaner System)
85045
10.INSTALL TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH (w/ Headlight Cleaner System)
85044
11.INSTALL TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY RH (w/ Headlight Cleaner System)
Use the same procedure described for the LH side.
52128B
12.INSTALL FRONT BUMPER HOLE COVER LH (w/o Fog Light)
Attach the 4 claws to install the front bumper hole cover LH.
52127D
13.INSTALL FRONT BUMPER HOLE COVER RH (w/o Fog Light)
Use the same procedure described for the LH side.
81482C
14.INSTALL FOG LIGHT COVER LH (w/ Fog Light)
Attach the 4 claws to install the fog light cover LH.
81481E
15.INSTALL FOG LIGHT COVER RH (w/ Fog Light)
Use the same procedure described for the LH side.
52126A
16.INSTALL FOG LIGHT MOUNTING BRACKET LH (w/ Fog Light)
Install the fog light mounting bracket LH with the 3 screws.
52125A
17.INSTALL FOG LIGHT MOUNTING BRACKET RH (w/ Fog Light)
Use the same procedure described for the LH side.
81220
18.INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light)
81210A
19.INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)
Use the same procedure described for the LH side.
52148B
20.INSTALL FRONT BUMPER REINFORCEMENT STOPPER RH (w/ Fog Light)
Attach the 3 claws to install the front bumper reinforcement stopper RH.
76852B
21.INSTALL FRONT SPOILER LH (w/ Front Spoiler)
| *1 | Front Spoiler No. 1 Retainer |
| *a | 90° |
Turn the 2 front spoiler No. 1 retainers 90° in the direction indicated by the arrow in the illustration to install it to the front spoiler LH.
76851B
22.INSTALL FRONT SPOILER RH (w/ Front Spoiler)
Use the same procedure described for the LH side.
52114A
23.INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET (w/ Bracket)
Attach the 2 claws to install the front bumper extension mounting bracket.
Install the 2 screws.