Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › RADIATOR GRILLE › from 2017.08
RM27T0E _59 Vehicle Exterior _053749 EXTERIOR PANELS / TRIM _0261317 RADIATOR GRILLE A

EXTERIOR PANELS / TRIM  RADIATOR GRILLE  REMOVAL  


CAUTION / NOTICE / HINT

HINT:

When the radiator grille is damaged or deformed due to an accident or contact with other objects, etc., or the radiator grille installation area on the body is repaired, it is necessary to perform millimeter wave radar sensor adjustment.

Click hereEngine / Hybrid System>CRUISE CONTROL>MILLIMETER WAVE RADAR SENSOR>ADJUSTMENT


PROCEDURE

Hide 53292A 1.REMOVE UPPER RADIATOR SUPPORT SEAL

Hide 53148A 2.REMOVE HEADLIGHT ORNAMENT GARNISH LH (for Halogen Headlight)

a.
B493873C01
0,0 0,0 false
V100155

Protective Tape


Put protective tape around the headlight ornament garnish LH.


b.

Detach the 4 clips and remove the headlight ornament garnish LH.


Hide 53147A 3.REMOVE HEADLIGHT ORNAMENT GARNISH RH (for Halogen Headlight)

HINT:

Use the same procedure described for the LH side.


Hide 53148A 4.REMOVE HEADLIGHT ORNAMENT GARNISH LH (for LED Headlight)

a.
B493874C02
0,0 0,0 false
V100155

Protective Tape


Put protective tape around the headlight ornament garnish LH.


b.

Detach the 8 clips and remove the headlight ornament garnish LH.


Hide 53147A 5.REMOVE HEADLIGHT ORNAMENT GARNISH RH (for LED Headlight)

HINT:

Use the same procedure described for the LH side.


Hide 53111 6.REMOVE RADIATOR GRILLE

a.
B488262C01
1.083,0.833 1.083,0.417 1.083,0.417 1.583,0.417 true 1.667,0.333 1.979,0.49 0.313,0.156 10 false *1
*1 Hood To Radiator Grille Seal


Detach the 2 clips and disconnect the hood to radiator grille seal.

HINT:

Use the same procedure for the RH side.



b.
B488263

Remove the 4 screws.


c.
B488328C01
0,0 0,0 false
V100155

Protective Tape


Put protective tape around the radiator grille.


d.
B488264

Detach the 6 claws and remove the radiator grille.


e.

w/ Toyota Safety Sense P:

i.

Disconnect the connector.



f.

w/ Multi-terrain Monitor:

i.

Disconnect the connector.