53111
1.REMOVE RADIATOR GRILLE
2.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
for HFC-134a (R134a):
Click hereVehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT (for HFC-134a(R134a))>REPLACEMENT
for HFO-1234yf (R1234yf):
Click hereVehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT(for HFO-1234yf(R1234yf))>REPLACEMENT
53525
3.REMOVE HOOD LOCK RELEASE LEVER PROTECTOR
53510
4.REMOVE HOOD LOCK ASSEMBLY
for LHD:
Click hereVehicle Exterior>DOOR / HATCH>HOOD LOCK CONTROL CABLE ASSEMBLY>REMOVAL
for RHD:
Click hereVehicle Exterior>DOOR / HATCH>HOOD LOCK CONTROL CABLE ASSEMBLY>REMOVAL
88710
5.REMOVE AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY
Disconnect the connector.
Detach the clamp, remove the 2 bolts and the air conditioning tube and accessory assembly.
It is not necessary to completely remove the air conditioning tube and accessory assembly. Move the tube so that the shroud blower assembly can be removed.
Remove the O-ring from the air conditioning tube and accessory assembly.
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
15710
6.DISCONNECT OIL COOLER ASSEMBLY (w/ Air Cooled Transmission Oil Cooler)
53209B
7.REMOVE HOOD LOCK SUPPORT BRACE SUB-ASSEMBLY
Detach the each clamp.
Remove the 4 bolts and hood lock support brace sub-assembly.
88590
8.REMOVE SHROUD BLOWER ASSEMBLY
Disconnect the connector.
Remove the bolt and shroud blower assembly as shown in the illustration.