Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
88625Q
1.INSTALL COOLER THERMISTOR (ROOM TEMPERATURE SENSOR)
Connect the connector and cooler air hose.
Attach the 2 claws to install the cooler thermistor (room temperature sensor).
55404D
2.INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
55480D
3.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY
55476C
4.INSTALL INSTRUMENT PANEL FINISH PLATE GARNISH (for RHD)
55471A
5.INSTALL INSTRUMENT CLUSTER FINISH PANEL ORNAMENT (for LHD)