Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
84970E
1.INSTALL NO. 2 COMBINATION SWITCH ASSEMBLY
Connect each connector.
Attach the 4 claws to install the No. 2 combination switch assembly (VSC OFF switch).
84988L
2.INSTALL VSC OFF SWITCH
Connect each connector.
Attach the 2 claws to install the VSC OFF switch.
58805E
3.INSTALL LOWER CONSOLE PANEL SUB-ASSEMBLY
84010A
4.INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY
55436A
5.INSTALL INSTRUMENT PANEL FINISH PANEL END LH
55435A
6.INSTALL INSTRUMENT PANEL FINISH PANEL END RH