53292A
1.REMOVE UPPER RADIATOR SUPPORT SEAL
52129B
2.REMOVE FRONT BUMPER COVER LOWER
51405A
3.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
4.DRAIN ENGINE COOLANT
52119A
5.REMOVE FRONT BUMPER COVER
52521
6.REMOVE FRONT BUMPER CENTER UPPER RETAINER
53293C
7.REMOVE RADIATOR SIDE DEFLECTOR RH
Using a clip remover, detach the 3 claws and remove the clip. Then move the radiator side deflector RH so that the radiator can be removed in the step below.
53294C
8.REMOVE RADIATOR SIDE DEFLECTOR LH
Using a clip remover, detach the 3 claws and remove the clip. Then move the radiator side deflector LH so that the radiator can be removed in the step below.
16470
9.REMOVE RADIATOR RESERVOIR
Disconnect the reservoir hose from the radiator assembly.
Remove the 3 bolts and radiator reservoir.
16711
10.REMOVE FAN SHROUD
Detach the claw to open the flexible hose clamp.
Loosen the 4 nuts holding the fluid coupling fan.
Remove the fan and generator V-belt.
Click hereEngine / Hybrid System>2TR-FE (ENGINE MECHANICAL)>DRIVE BELT>REMOVAL
Remove the 2 bolts holding the fan shroud.
Remove the 4 nuts of the fluid coupling fan, and then remove the shroud together with the coupling fan.
Be careful not to damage the radiator core.
16571C
11.DISCONNECT NO. 1 RADIATOR HOSE
Slide the hose clamp and disconnect the No. 1 radiator hose from the radiator assembly.
16572D
12.DISCONNECT NO. 2 RADIATOR HOSE
Slide the hose clamp and disconnect the No. 2 radiator hose from the radiator assembly.
32941
13.DISCONNECT OIL COOLER INLET HOSE (for Automatic Transmission)
Slide the hose clamp and disconnect the oil cooler inlet hose from the radiator assembly.
32942A
14.DISCONNECT OIL COOLER OUTLET HOSE (for Automatic Transmission)
Slide the hose clamp and disconnect the oil cooler outlet hose from the radiator assembly.
16400
15.REMOVE RADIATOR ASSEMBLY
Remove the 4 bolts and radiator assembly.
16533B
16.REMOVE NO. 1 RADIATOR SUPPORT
Remove the 2 No. 1 radiator supports and 2 No. 1 radiator support bushes.
16534
17.REMOVE NO. 2 RADIATOR SUPPORT
Remove the 2 No. 2 radiator supports and 2 No. 1 radiator support bushes.
16561
18.REMOVE NO. 1 RADIATOR TO SUPPORT SEAL
Remove the No. 1 radiator to support seal from the radiator assembly.
16562
19.REMOVE NO. 2 RADIATOR TO SUPPORT SEAL
Remove the No. 2 radiator to support seal from the radiator assembly.