Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
84970
1.INSTALL COMBINATION SWITCH ASSEMBLY (CRAWL SWITCH)
Connect the clamp and 4 connectors to install the combination switch assembly (crawl switch).
Attach the 3 clips and install the combination switch assembly (crawl switch) with the 2 bolts.
55405B
2.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
84010A
3.INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY
55436A
4.INSTALL INSTRUMENT PANEL FINISH PANEL END LH
55435A
5.INSTALL INSTRUMENT PANEL FINISH PANEL END RH