Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
84970
1.INSTALL COMBINATION SWITCH ASSEMBLY (REAR DIFFERENTIAL LOCK CONTROL SWITCH)
Connect the clamp and 4 connectors to install the combination switch assembly (rear differential lock control switch).
Attach the 3 clips and install the combination switch assembly (rear differential lock control switch) with the 2 bolts.
55405B
2.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
84010A
3.INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY
55436A
4.INSTALL INSTRUMENT PANEL FINISH PANEL END LH
55435A
5.INSTALL INSTRUMENT PANEL FINISH PANEL END RH