Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › THEFT DETERRENT SYSTEM (except 5L-E) › from 2017.08
RM27T0E _58 Vehicle Interior _053731 THEFT DETERRENT / KEYLESS ENTRY _0329511 THEFT DETERRENT SYSTEM(except 5L-E) C

THEFT DETERRENT / KEYLESS ENTRY  THEFT DETERRENT SYSTEM(except 5L-E)  B2761  Intrusion Sensor Internal Circuit Malfunction  


DESCRIPTION

The intrusion and tilt sensor (theft warning ultrasonic sensor) conducts self-diagnosis immediately after power is supplied to the sensor (when the theft deterrent system is set).

If a problem is detected in the signals transmitted and received by the intrusion and tilt sensor (theft warning ultrasonic sensor), or if the transmission or reception circuits malfunction, the intrusion and tilt sensor (theft warning ultrasonic sensor) transmits a signal to the main body ECU (multiplex network body ECU). The main body ECU (multiplex network body ECU) then stores this DTC.

DTC Code Detection Item DTC Detection Condition Trouble Area
B2761 Intrusion Sensor Internal Circuit Malfunction Intrusion and tilt sensor (theft warning ultrasonic sensor) outputs signal for sensor malfunction Intrusion and tilt sensor (theft warning ultrasonic sensor)

PROCEDURE

1.REPLACE INTRUSION AND TILT SENSOR (THEFT WARNING ULTRASONIC SENSOR)
a.

Temporarily replace the intrusion and tilt sensor (theft warning ultrasonic sensor) with a new or normally functioning one.

Click hereVehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>INTRUSION SENSOR>REMOVAL


Result:
Proceed to
NEXT



NEXT

END (INTRUSION AND TILT SENSOR (THEFT WARNING ULTRASONIC SENSOR) WAS DEFECTIVE)