Home › Drivetrain › AC60F (AUTOMATIC TRANSMISSION / TRANSAXLE) › AUTOMATIC TRANSMISSION SYSTEM (for 2TR-FE) › from 2017.08
RM27T0E _52 Drivetrain _053698 AC60F AUTOMATIC TRANSMISSION / TRANSAXLE _0260769 AUTOMATIC TRANSMISSION SYSTEM(for 2TR-FE) J

AC60F AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSMISSION SYSTEM(for 2TR-FE)  Pattern Select Switch 2nd Start Mode Circuit  


DESCRIPTION

When 2nd start mode is selected with the pattern select switch assembly (2nd start), the ECM controls the solenoid valves and the transmission starts from 2nd gear.

In 2nd start mode, the system operates the throttle motor to control engine output to reduce skidding of the drive wheels and guarantee stable acceleration from rest, straight driving and turning stability.

When the shift lever is in D, the transmission automatically shifts up from 2nd to 6th as usual.

HINT:
·

The pattern select switch assembly (2nd start) is a momentary-type switch.

·

In order to cancel 2nd start mode, push the pattern select switch assembly (2nd start) again or turn the ignition switch off.



WIRING DIAGRAM

C326150E38
6.313,1.073 6.646,1.26 0.333,0.188 10 false 12 V 5.896,3 6.281,3.229 0.385,0.229 10 false G180 5.917,3.167 6.271,3.365 0.354,0.198 10 false ECM 5.24,1.25 5.458,1.448 0.219,0.198 10 false 23 3.896,1.25 4.052,1.448 0.156,0.198 10 false 5 3.521,1.25 3.979,1.448 0.458,0.198 10 false 2ND 2.563,1.26 2.719,1.458 0.156,0.198 10 false E 2.323,1.25 2.542,1.448 0.219,0.198 10 false 2 5.5,1.26 6.115,1.458 0.615,0.198 10 false SNWI 2.5,1.969 2.958,2.146 0.458,0.177 10 false G225 2.5,2.167 3.875,2.667 1.375,0.5 10 false Pattern Select Switch Assembly (2nd Start)

PROCEDURE

1.INSPECT PATTERN SELECT SWITCH ASSEMBLY (2ND START)
a.
C380113E01
2.313,1.844 2.063,1.313 true 1.208,1.833 1.375,1.313 true 1.052,1.896 1.396,2.104 0.344,0.208 10 false 2ND 2.365,1.885 2.521,2.083 0.156,0.198 10 false E 0.146,0.104 0.417,0.354 0.271,0.25 10 false *1

Remove the pattern select switch assembly (2nd start) (See page Drivetrain>AC60F (AUTOMATIC TRANSMISSION / TRANSAXLE)>COMBINATION SWITCH>REMOVAL).


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
5 (2ND) - 2 (E) 2ND START switch pushed and held Below 1 Ω
5 (2ND) - 2 (E) 2ND START switch not pushed 10 kΩ or higher


Text in Illustration
*1 Pattern Select Switch Assembly (2nd Start)



OK

2.CHECK HARNESS AND CONNECTOR (PATTERN SELECT SWITCH ASSEMBLY (2ND START) - BODY GROUND)

NG

REPLACE PATTERN SELECT SWITCH ASSEMBLY (2ND START)

2.CHECK HARNESS AND CONNECTOR (PATTERN SELECT SWITCH ASSEMBLY (2ND START) - BODY GROUND)
a.
C386004E01
1.438,0.281 1.958,0.573 0.521,0.292 1.052,1.76 1.469,1.344 true 0.156,0.156 0.469,0.354 0.313,0.198 10 false *a 1.531,0.354 2.146,0.552 0.615,0.198 10 false G225 0.844,1.76 1,1.958 0.156,0.198 10 false E

Disconnect the pattern select switch assembly (2nd start) connector.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
G225-2 (E) - Body ground Always Below 1 Ω


Text in Illustration
*a Front view of wire harness connector
(to Pattern Select Switch Assembly (2nd Start))



OK

3.CHECK HARNESS AND CONNECTOR (PATTERN SELECT SWITCH ASSEMBLY (2ND START) - ECM)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

3.CHECK HARNESS AND CONNECTOR (PATTERN SELECT SWITCH ASSEMBLY (2ND START) - ECM)
a.
U170455E02
2.635,1.75 2.323,2.281 false 1.906,2.333 2.656,2.656 0.75,0.323 10 false 23 (SNWI) 2.406,0.177 2.917,0.385 0.51,0.208 10 false G180 0.073,0.073 0.583,0.281 0.51,0.208 10 false *a

Disconnect the ECM connector.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
G180-23 (SNWI) - Body ground 2ND START switch switch pushed and held Below 1 Ω
G180-23 (SNWI) - Body ground 2ND START switch switch not pushed 10 kΩ or higher


Text in Illustration
*a Rear view of wire harness connector
(to ECM)



OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR