Home › Vehicle Interior › PRE-CRASH SAFETY › PRE-CRASH SAFETY SYSTEM WARNING BUZZER › 2017.08–2020.08
RM27T0E _58 Vehicle Interior _053736 PRE-CRASH SAFETY _0330261 PRE-CRASH SAFETY SYSTEM WARNING BUZZER A

PRE-CRASH SAFETY  PRE-CRASH SAFETY SYSTEM WARNING BUZZER  INSTALLATION  


PROCEDURE

Hide 86652A 1.INSTALL SKID CONTROL BUZZER ASSEMBLY

a.

Connect the connector.

NOTICE:

Securely connect the connector.



b.

Attach the clamp to install the skid control buzzer assembly.

NOTICE:
·

Securely insert the clamp into the dash panel.

·

If the buzzer is dropped, replace it.




Hide 2.INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

Hide 3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION