Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › VEHICLE STABILITY CONTROL SYSTEM (for Hydraulic Brake Booster) › from 2017.08
RM27T0E _54 Brake _053712 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0260911 VEHICLE STABILITY CONTROL SYSTEM(for Hydraulic Brake Booster) C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  VEHICLE STABILITY CONTROL SYSTEM(for Hydraulic Brake Booster)  C1225  SM Solenoid Circuit  C1226  SA2 Solenoid Circuit  C1227  SA3 Solenoid Circuit  C1228  STR Solenoid Circuit  C1468  SFR Solenoid Circuit  C1469  SFL Solenoid Circuit  C146A  SRR Solenoid Circuit  C146B  SRL Solenoid Circuit  


DESCRIPTION

The solenoid turns on when signals are received from the skid control ECU (master cylinder solenoid) and controls the pressure acting on the wheel cylinders, thus controlling braking force.

DTC Code DTC Detection Condition Trouble Area
C1225 An open or short circuit in the SMCF circuit continues for 0.05 seconds or more.
·

SMCF circuit

·

Skid control ECU (Master cylinder solenoid)


C1226 An open or short circuit in the SREA circuit continues for 0.05 seconds or more.
·

SREA circuit

·

Skid control ECU (Master cylinder solenoid)


C1227 An open or short circuit in the SREC circuit continues for 0.05 seconds or more.
·

SREC circuit

·

Skid control ECU (Master cylinder solenoid)


C1228 An open or short circuit in the STR circuit continues for 0.05 seconds or more.
·

STR circuit

·

Skid control ECU (Master cylinder solenoid)


C1468 An open or short circuit in the SFRH or SFRR circuit continues for 0.05 seconds or more.
·

SFRH or SFRR circuit

·

Skid control ECU (Master cylinder solenoid)


C1469 An open or short circuit in the SFLH or SFLR circuit continues for 0.05 seconds or more.
·

SFLH or SFLR circuit

·

Skid control ECU (Master cylinder solenoid)


C146A An open or short circuit in the SRRH or SRRR circuit continues for 0.05 seconds or more.
·

SRRH or SRRR circuit

·

Skid control ECU (Master cylinder solenoid)


C146B An open or short circuit in the SRLH or SRLR circuit continues for 0.05 seconds or more.
·

SRLH or SRLR circuit

·

Skid control ECU (Master cylinder solenoid)



WIRING DIAGRAM

C220139E19
0.677,1.396 1.625,1.615 0.948,0.219 10 false ABS NO.2 1.771,1.01 2.042,1.188 0.271,0.177 10 false 31 1.74,1.208 2.073,1.406 0.333,0.198 10 false A7 3.688,0.479 4.896,0.688 1.208,0.208 10 false Skid Control ECU 3.865,1.146 4.854,1.385 0.99,0.24 10 false Solenoid Relay 5.99,1.656 6.344,1.865 0.354,0.208 10 false STR 5.927,2.156 6.448,2.344 0.521,0.188 10 false SREC 5.917,2.677 6.438,2.865 0.521,0.188 10 false SFRH 5.938,3.167 6.385,3.354 0.448,0.188 10 false SFLH 5.927,3.656 6.375,3.844 0.448,0.188 10 false SRRH 5.927,4.146 6.375,4.333 0.448,0.188 10 false SRLH 5.938,4.667 6.385,4.854 0.448,0.188 10 false SFRR 5.927,5.667 6.375,5.854 0.448,0.188 10 false SRRR 5.927,6.156 6.375,6.344 0.448,0.188 10 false SRLR 5.938,6.667 6.385,6.854 0.448,0.188 10 false SREA 5.938,5.177 6.385,5.365 0.448,0.188 10 false SFLR 5.927,7.167 6.375,7.354 0.448,0.188 10 false SMCF 2.146,1.333 2.563,1.542 0.417,0.208 10 false +BS 1.771,5.083 2.104,5.281 0.333,0.198 10 false A7 1.76,5.865 2.094,6.063 0.333,0.198 10 false A7 1.76,6.656 2.094,6.854 0.333,0.198 10 false A8 1.802,4.854 1.958,5.031 0.156,0.177 10 false 1 1.781,5.656 1.969,5.833 0.188,0.177 10 false 32 1.823,6.458 1.979,6.635 0.156,0.177 10 false 4 0.24,3.323 1.042,3.542 0.802,0.219 10 false from Battery 2.125,5.094 2.667,5.333 0.542,0.24 10 false GND1 2.125,5.865 2.667,6.104 0.542,0.24 10 false GND2 2.115,6.656 2.656,6.896 0.542,0.24 10 false GND3 3.104,8.313 6.292,8.5 3.188,0.188 10 false Skid Control ECU (Master Cylinder Solenoid)

CAUTION / NOTICE / HINT

NOTICE:

When replacing the skid control ECU (master cylinder solenoid), perform zero point calibration and store the system information (See page Brake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>VEHICLE STABILITY CONTROL SYSTEM (for Hydraulic Brake Booster)>CALIBRATION).


PROCEDURE

1.RECONFIRM DTC
HINT:

These codes are stored when a problem is detected in the skid control ECU (master cylinder solenoid).

The solenoid circuit is in the skid control ECU (master cylinder solenoid).

Therefore, solenoid circuit inspections and solenoid unit inspections cannot be performed. Be sure to check if any DTC is output before replacing the skid control ECU (master cylinder solenoid).



b.

Drive the vehicle at a speed of approximately 32 km/h (20 mph) or more for 60 seconds or more.


c.

Check if the same DTCs are output (See page Brake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>VEHICLE STABILITY CONTROL SYSTEM (for Hydraulic Brake Booster)>DTC CHECK / CLEAR).

Result
Result Proceed to
DTC is not output A
DTC is output (for LHD) B
DTC is output (for RHD) C



A

B

C