Home › Audio / Visual / Telematics › TELEMATICS › ANTENNA DIVIDER › 2017.08–2020.08
RM27T0E _56 Audio / Visual / Telematics _056796 TELEMATICS _0333744 ANTENNA DIVIDER A

TELEMATICS  ANTENNA DIVIDER  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.


NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 55401E 3.REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

Hide 86681C 4.REMOVE ANTENNA DIVIDER

a.
E348968

Disconnect the connector.


b.

Remove the 2 screws and antenna divider.