Home › Suspension › SUSPENSION CONTROL › AIR SUSPENSION SYSTEM › from 2017.08
RM27T0E _53 Suspension _053706 SUSPENSION CONTROL _0260870 AIR SUSPENSION SYSTEM C

SUSPENSION CONTROL  AIR SUSPENSION SYSTEM  U0100  Lost Communication with ECM / PCM "A"  U0114  Lost Communication with Four-Wheel Drive Clutch Control Module  U0122  Lost Communication with Vehicle Dynamics Control Module  U0124  Lost Communication with Lateral Acceleration Sensor Module  U0126  Lost Communication with Steering Angle Sensor  U0140  Lost Communication with Body Control Module  


DESCRIPTION

DTC Code DTC Detection Condition Trouble Area
U0100 While driving at 30 km/h (19 mph), the ECM informs of a CAN communication stop for 3 seconds or more. CAN communication system
U0114 The four wheel drive control ECU informs of a CAN communication stop for 3 seconds or more.
U0122 The skid control ECU informs of a CAN communication stop for 3 seconds or more.
U0124 The yaw rate and acceleration sensor informs of a CAN communication stop for 3 seconds or more.
U0126 The steering sensor informs of a CAN communication stop for 3 seconds or more.
U0140 The main body ECU informs of a CAN communication stop for 10 seconds or more.

When DTCs indicating a CAN communication system malfunction are output, repair CAN communication system first.

PROCEDURE

1.CHECK FOR DTC

b.

Perform a road test.


c.

Check for DTCs (See page Suspension>SUSPENSION CONTROL>AIR SUSPENSION SYSTEM>DTC CHECK / CLEAR).

Result
Result Proceed to
DTC is not output A
DTC is output B

HINT:

If a CAN communication malfunction DTC and a related sensor malfunction DTC are output at the same time, the CAN communication malfunction must be repaired before troubleshooting the sensor malfunction DTC.




A

B

GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING)