12601B
1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY (w/o Urea SCR System)
89481B
2.REMOVE DIFFERENTIAL PRESSURE SENSOR
| *A | w/o Urea SCR System |
| *B | w/ Urea SCR System |
Disconnect the connector from the differential pressure sensor.
| *A | w/o Urea SCR System |
| *B | w/ Urea SCR System |
Remove the bolt and differential pressure sensor from the pipe clamp.
Slide the 2 clamps and remove the 2 No. 1 air hoses from the differential pressure sensor.