Home › Engine / Hybrid System › 1GD-FTV (EMISSION CONTROL) › DIFFERENTIAL PRESSURE SENSOR › from 2018.06
RM27T0E _51 Engine / Hybrid System _053675 1GD-FTV EMISSION CONTROL _0260625 DIFFERENTIAL PRESSURE SENSOR A

1GD-FTV EMISSION CONTROL  DIFFERENTIAL PRESSURE SENSOR  INSTALLATION  


PROCEDURE

Hide 89481B 1.INSTALL DIFFERENTIAL PRESSURE SENSOR

a.
A346701E02
1.76,1.115 2.063,1.115 false 1.531,1.042 1.219,1.042 false 2.094,1.021 2.365,1.26 0.271,0.24 10 false *a 1.042,0.948 1.313,1.188 0.271,0.24 10 false *a

Install the 2 air hoses to the differential pressure sensor, and slide the 2 clamps to secure the 2 hoses.

HINT:

Make sure the paint mark of the air hose side the differential pressure sensor.


Text in Illustration
*a Paint Mark


b.

Connect the 2 air hoses to the No. 1 vacuum pipe and No. 2 vacuum pipe, and slide the 2 clamps to secure the 2 hoses.


c.

Install the differential pressure sensor to the pipe clamp with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


d.

Connect the connector to the differential pressure sensor.


Hide 12601B 2.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (w/o Urea SCR System)