Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM (w/ VSC) › from 2017.08
RM27T0E _55 Steering _053717 POWER ASSIST SYSTEMS _0260945 POWER STEERING SYSTEM(w/ VSC) C

POWER ASSIST SYSTEMS  POWER STEERING SYSTEM(w/ VSC)  C15F1  Steering Angle Sensor Circuit  


DESCRIPTION

The power steering ECU receives steering angle signals from the steering sensor via CAN communication. The power steering ECU provides appropriate assisting force in accordance with the steering angle signal.

DTC Code DTC Detection Condition Trouble Area
C15F1 An abnormal steering angle signal is received.
·

Steering sensor

·

CAN communication system

·

Power steering ECU assembly



PROCEDURE

1.CHECK OTHER DTC OUTPUT (CAN COMMUNICATION SYSTEM)
a.

Check if DTC U0126 is output (See page Steering>POWER ASSIST SYSTEMS>POWER STEERING SYSTEM (w/ VSC)>DTC CHECK / CLEAR).

Result
Result Proceed to
DTC U0126 is not output. A
DTC U0126 is output. B

HINT:

DTC U0126 indicates a CAN communication malfunction in the power steering system.




A

2.CHECK OTHER DTC OUTPUT (BRAKE CONTROL SYSTEM)

B

REPAIR CIRCUIT INDICATED BY OUTPUTCODE

2.CHECK OTHER DTC OUTPUT (BRAKE CONTROL SYSTEM)
a.

Using the GTS, check for DTCs related to the steering sensor and confirm that there are no problems in the brake control system (See page Brake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>VEHICLE STABILITY CONTROL SYSTEM (for Hydraulic Brake Booster)>DTC CHECK / CLEAR for Hydraulic Brake Booster, Brake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>VEHICLE STABILITY CONTROL SYSTEM(for Vacuum Brake Booster)>DTC CHECK / CLEAR for Vacuum Brake Booster).

Result
Result Proceed to
DTC is not output. A
DTC is output. for Hydraulic Brake Booster B
for Vacuum Brake Booster C



A

REPLACE POWER STEERING ECU ASSEMBLY

B

C