Home › Audio / Visual / Telematics › AUDIO / VIDEO › TELEVISION DISPLAY › from 2020.08
RM27T0E _56 Audio / Visual / Telematics _053720 AUDIO / VIDEO _0260976 TELEVISION DISPLAY A

AUDIO / VIDEO  TELEVISION DISPLAY  INSTALLATION  


PROCEDURE

Hide 86680A 1.INSTALL TELEVISION DISPLAY ASSEMBLY

a.
B358771

Attach the television display assembly to the 2 guides on the front side of the bracket by moving it in the direction of the arrow in the illustration, and then attach 2 new clips to temporarily install the television display assembly.


b.
B358769E01
2.53,1.759 2.734,1.942 0.204,0.183 10 (1) 2.984,1.252 3.188,1.435 0.204,0.183 10 (3) 0.97,1.703 1.173,1.887 0.204,0.183 10 (4) 1.459,1.06 1.663,1.243 0.204,0.183 10 (2)

Install the television display assembly with the 4 bolts in the order shown in the illustration.

Torque:
8.5 N*m (87 kgf*cm, 75 in.*lbf)


c.

Connect the connector.


Hide 86295 2.INSTALL TELEVISION BASE

a.

Attach the 7 claws and 4 clips to install the television base.


Hide 3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Hide 4. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE

HINT:

When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART