Home › Audio / Visual / Telematics › AUDIO / VIDEO › AMPLIFIER ANTENNA › from 2020.08
RM27T0E _56 Audio / Visual / Telematics _053720 AUDIO / VIDEO _0260978 AMPLIFIER ANTENNA A

AUDIO / VIDEO  AMPLIFIER ANTENNA  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Hide 86300 4.REMOVE HOLDER ANTENNA ASSEMBLY (for 5 Door)

a.

for Diversity:

i.

Disconnect the 3 connectors.


ii.

Remove the bolt and holder antenna shown in the part of the illustration labeled A.


iii.

Detach the clamp and remove the holder antenna shown in the part of the illustration labeled B.

B239121E03
1.802,0.979 1.979,1.198 0.177,0.219 10 false B 3.771,0.969 3.896,1.135 0.125,0.167 10 true A



b.

for Non Diversity:

i.

Disconnect the 2 connectors.


ii.

Remove the bolt and holder antenna.

B239122



Hide 86300 5.REMOVE HOLDER ANTENNA ASSEMBLY (for 3 Door)

a.

for Diversity:

i.

Disconnect the 3 connectors.


ii.

Detach the clamp and remove the bolt and holder antenna shown in the part of the illustration labeled A.


iii.

Detach the 4 clamps and remove the bolt and holder antenna shown in the part of the illustration labeled B.

B239123E02
1.813,0.958 1.948,1.104 0.135,0.146 10 false A 3.76,0.958 3.938,1.146 0.177,0.188 10 true B



b.

for Non Diversity:

i.

Disconnect the 2 connectors.


ii.

Detach the clamp and remove the bolt and holder antenna.

B239124