Home › Engine / Hybrid System › 1GD-FTV (ENGINE CONTROL) › INTAKE AIR TEMPERATURE SENSOR › from 2020.08
RM27T0E _51 Engine / Hybrid System _053660 1GD-FTV ENGINE CONTROL _0260468 INTAKE AIR TEMPERATURE SENSOR A

1GD-FTV ENGINE CONTROL  INTAKE AIR TEMPERATURE SENSOR  REMOVAL  


PROCEDURE

Hide 12601B 1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Hide 89424D 2.INSTALL INTAKE AIR TEMPERATURE SENSOR

a.

w/o Urea SCR System:

i.
A471705

Disconnect the intake air temperature sensor connector.


ii.

Using a 22 mm deep socket wrench, remove the intake air temperature sensor and gasket from the intake air connector.



b.

w/ Urea SCR System:

i.
A424421

for Intake Air Connector:

Disconnect the intake air temperature sensor connector.


ii.

for Intake Air Connector:

Using a 17 mm deep socket wrench, remove the intake air temperature sensor and gasket from the intake air connector.


iii.
A424422

for Intercooler:

Disconnect the intake air temperature sensor connector.


iv.

for Intercooler:

Using a 17 mm deep socket wrench, remove the intake air temperature sensor and gasket from the intercooler assembly.