Home › Engine / Hybrid System › STOP AND START › STOP AND START SYSTEM › from 2020.08
RM27T0E _51 Engine / Hybrid System _091546 STOP AND START _0437376 STOP AND START SYSTEM C

STOP AND START  STOP AND START SYSTEM  P161D9E  Starter Delay Circuit Stuck On  


DESCRIPTION

By using the starter delay circuit, the engine stop and start ECU can activate the ST NO. 2 relay (for starter motor operation) after activating the ST relay (for starter pinion operation) to operate the starter assembly.

By monitoring the condition of the ST relay (for starter pinion operation) and ST NO. 2 relay (for starter motor operation), the engine stop and start ECU detects if the transistor of the starter delay circuit is stuck. If the transistor of the starter delay circuit is stuck on, the engine stop and start ECU blinks the stop and start cancel indicator and stores DTC P161D9E. If the transistor of the starter delay circuit is stuck on, the ST relay (for starter pinion operation) and ST NO. 2 relay (for starter motor operation) will be activated simultaneously.

A475034E01
3.344,0.563 5.375,0.781 2.031,0.219 10 false BBC NO. 2 3.958,0.969 5.323,1.167 1.365,0.198 10 false BBC NO. 3 4.917,0.292 5.531,0.49 0.615,0.198 10 false BIN1 4.927,0.698 5.542,0.896 0.615,0.198 10 false BIN2 2.344,1.896 3.677,2.271 1.333,0.375 10 false Park/Neutral Position Switch Assembly 0.417,1.771 1.958,2.208 1.542,0.438 10 false Certification ECU (Smart Key ECU Assembly) 1.063,1.406 1.677,1.604 0.615,0.198 10 false STAR 2.552,1.188 2.708,1.385 0.156,0.198 10 false L 2.542,1.427 2.698,1.625 0.156,0.198 10 false B 2.781,1.656 2.938,1.854 0.156,0.198 10 false P 3.021,1.656 3.177,1.854 0.156,0.198 10 false N 4.917,2.479 5.375,2.677 0.458,0.198 10 false STA 4.948,3.375 5.406,3.573 0.458,0.198 10 false STA2 3.615,3.01 4.375,3.208 0.76,0.198 10 false ST 0.708,2.781 1.938,2.979 1.229,0.198 10 false 250A FL 1.865,3.281 3.094,3.479 1.229,0.198 10 false ST NO. 2 2.146,4.719 2.896,4.938 0.75,0.219 10 false ST NO. 2 0.563,7.302 1.635,7.5 1.073,0.198 10 false Battery 5.063,3.833 6.792,4.073 1.729,0.24 10 false Engine Stop and Start ECU 4.865,8.375 6.063,8.583 1.198,0.208 10 false Starter Assembly 3.99,4.344 4.25,4.542 0.26,0.198 10 false ST 3.979,4.958 4.135,5.156 0.156,0.198 10 false B 3.979,6.448 4.438,6.646 0.458,0.198 10 false SL2 4,7.406 4.458,7.604 0.458,0.198 10 false SL1 5.25,5.458 5.406,5.656 0.156,0.198 10 false L 5.24,5.906 5.396,6.104 0.156,0.198 10 false B 5.302,6.146 5.458,6.344 0.156,0.198 10 false M 0.594,0.583 1.667,0.781 1.073,0.198 10 false 125A FL 2.375,2.802 2.688,3 0.313,0.198 10 false ST

DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Memory Note
P161D9E Starter Delay Circuit Stuck On Both of the following conditions are met (1 trip detection logic):
·

Engine switch on (IG)

·

Time between ST relay (for starter pinion) turning on and ST NO. 2 relay (for starter motor) turning on becomes less than 0.016 seconds and 3 times or more


Engine stop and start ECU Blinks DTC stored SAE Code: P161D

CONFIRMATION DRIVING PATTERN

CONFIRMATION AFTER TROUBLESHOOTING


HINT:
·

If the cable is disconnected from the battery terminal, stop and start control is prohibited until refresh charge is completed.

In this case, let the vehicle idle to complete the refresh charge. The refresh charge is complete when the Data List item "Status of Battery Charge Control" changes from "Refresh Charge Mode". (Usually, idling the engine for 5 to 60 minutes with the battery fluid temperature at 11°C (52°F) or higher, the refresh charge will be completed.)

·

If the GTS is not available and the Data List item "Status of Battery Charge Control" cannot be checked, charge the battery by idling the engine for approximately 5 to 60 minutes or driving the vehicle, and then drive the vehicle and check that stop and start control operates.

If the engine is started with the hood open, the system determines that a jump start has occurred. Therefore, make sure that the hood is closed before starting the engine and driving the vehicle.

·

After the refresh charge completes, turn the engine switch off, wait for at least 30 seconds, and then start the engine again. If the vehicle enters refresh charge mode again while the engine is idling, the initial refresh charge did not properly complete, so wait for the refresh charge to complete.

·

Allow the engine to idle for 3 minutes after it is warmed up and check that the engine idle speed is within 50 rpm of the target idle speed.



a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG) and turn the GTS on.


c.

Clear the DTCs.


d.

Start the engine and warm it up.


e.

Drive the vehicle at 7 km/h (4.3 mph) or more.

CAUTION:

When performing Confirmation Driving Pattern, obey all speed limits and traffic laws.



f.

Depress the brake pedal and stop the vehicle.


g.

Keep the engine stopped by stop and start control. (Keep the shift lever in D.)


h.

Release the brake pedal with the shift lever in D to start the engine.


i.

Drive the vehicle at 7 km/h (4.3 mph) or more.

CAUTION:

When performing Confirmation Driving Pattern, obey all speed limits and traffic laws.



j.

Depress the brake pedal and stop the vehicle.


k.

Keep the engine stopped by stop and start control. (Keep the shift lever in D.)


l.

Release the brake pedal with the shift lever in D to start the engine.


m.

Drive the vehicle at 7 km/h (4.3 mph) or more.

CAUTION:

When performing Confirmation Driving Pattern, obey all speed limits and traffic laws.



n.

Depress the brake pedal and stop the vehicle.


o.

Keep the engine stopped by stop and start control. (Keep the shift lever in D.)


p.

Release the brake pedal with the shift lever in D to start the engine.


q.

Check that no DTCs are output.



STOP AND START SYSTEM OPERATION CHECK


Click hereEngine / Hybrid System>STOP AND START>STOP AND START SYSTEM>OPERATION CHECK


WIRING DIAGRAM

CAUTION / NOTICE / HINT

NOTICE:
·

Before replacing the engine stop and start ECU , read the number of starter operations and write it into a new engine stop and start ECU.

Click hereEngine / Hybrid System>STOP AND START>STOP AND START SYSTEM>REGISTRATION

·

After replacing the engine stop and start ECU or air conditioning amplifier assembly, reset and perform learning of the air conditioning information in the engine stop and start ECU.

Click hereEngine / Hybrid System>STOP AND START>STOP AND START SYSTEM>REGISTRATION

·

After replacing the engine stop and start ECU, airbag sensor assembly, clear and calibrate the deceleration sensor zero point in the engine stop and start ECU.

Click hereEngine / Hybrid System>STOP AND START>STOP AND START SYSTEM>REGISTRATION

·

After replacing the engine stop and start ECU assembly, perform learning of the external backup boost converter (eco run vehicle converter assembly).

Click hereEngine / Hybrid System>STOP AND START>STOP AND START SYSTEM>DTC CHECK / CLEAR

·

When the engine stop and start ECU or electromagnetic oil pump is replaced, check the electromagnetic oil pump.

Click hereEngine / Hybrid System>STOP AND START>STOP AND START SYSTEM>REGISTRATION



HINT:
·

Using the GTS, read the freeze frame data before troubleshooting. System condition information is recorded as freeze frame data the moment a DTC is stored. This information can be useful when troubleshooting.

Click hereEngine / Hybrid System>STOP AND START>STOP AND START SYSTEM>FREEZE FRAME DATA

·

DTCs for the stop and start system are not cleared even if the malfunction has been repaired. After repairing the malfunction, be sure to clear the DTCs.

Click hereEngine / Hybrid System>STOP AND START>STOP AND START SYSTEM>DTC CHECK / CLEAR



PROCEDURE

1.CHECK ENGINE STOP AND START ECU (STA, STA2 SIGNAL)
a.

Connect an oscilloscope to the STA, STA2 and DGND terminals of the stop and start ECU connector.

A456121C44
3.26,0.094 3.646,0.365 0.385,0.271 3.698,0.823 3.969,1.438 true 3.219,0.948 2.729,1.427 true 3.385,0.917 3.156,1.469 true 0.708,0.094 1.021,0.292 0.313,0.198 10 false *a 4,1.49 4.615,1.688 0.615,0.198 10 false DGND 2.583,1.458 3.198,1.656 0.615,0.198 10 false STA2 3.313,0.156 3.927,0.354 0.615,0.198 10 false G313 3.021,1.521 3.479,1.719 0.458,0.198 10 false STA
*a Component with harness connected
(Engine Stop and Start ECU)
- -



b.
A285702E49
0.042,0.677 0.5,0.875 0.458,0.198 10 false STA 0.042,1.281 0.5,1.479 0.458,0.198 10 false STA2 1.198,1.771 2.958,1.958 1.76,0.188 10 false 0.016 seconds or more 0.021,0.875 1.854,1.073 1.833,0.198 10 false (ST Relay) 0.031,1.458 1.865,1.656 1.833,0.198 10 false (ST NO. 2 Relay)

Check the waveform immediately after turning the engine switch on (START).

Item Condition
Tester Connection G313-21 (STA) - G313-6 (DGND)
G313-23 (STA2) - G313-6 (DGND)
Condition Engine started by push start switch assembly operation

Result:
Result Proceed to
Time between ST relay (for starter pinion) turning on and ST NO. 2 relay (for starter motor) turning on becomes 0.016 seconds or more A
Time between ST relay (for starter pinion) turning on and ST NO. 2 relay (for starter motor) turning on becomes less than 0.016 seconds B




A

B