Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM › from 2020.08
RM27T0E _51 Engine / Hybrid System _053696 CRUISE CONTROL _0260748 DYNAMIC RADAR CRUISE CONTROL SYSTEM J

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM  Cruise Main Indicator Light Circuit  


DESCRIPTION

When the dynamic radar cruise control system is turned on using the cruise control main switch (ON-OFF), the cruise control indicator (vehicle-to-vehicle distance control mode) illuminates. The ECM uses this and other indicators to indicate the status (presence or absence of a preceding vehicle, vehicle-to-vehicle distance, malfunction of system or related systems) of the dynamic radar cruise control system.

CAUTION / NOTICE / HINT

NOTICE:
·

Before replacing the ECM, refer to Service Bulletin.

·

When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.



PROCEDURE

1.PERFORM ACTIVE TEST USING GTS
a.

Perform the Active Test according to the display on the GTS.

Body Electrical > Combination Meter > Active Test
Tester Display Measurement Item Control Range Diagnostic Note
Meter Display 1 Multi-information display OFF or All -


Result:
Result Proceed to
The multi-information display in the combination meter assembly turns on according to the operation of the Active Test. A
The multi-information display in the combination meter assembly does not turn on according to the operation of the Active Test. B



A

2.READ VALUE USING GTS

B

2.READ VALUE USING GTS
a.

Read the Data List according to the display on the GTS.

i.

Radar Cruise1 (for 1GR-FE, 2TR-FE):

Powertrain > Radar Cruise1 > Data List
Tester Display Measurement Item / Range Normal Condition Diagnostic Note
Cruise Indicator Cruise control indicator status / ON or OFF ON: Cruise control indicator illuminates
OFF: Cruise control indicator turns off
-


ii.

Radar Cruise1 (for 1GD-FTV):

Powertrain > Radar Cruise1 > Data List
Tester Display Measurement Item / Range Normal Condition Diagnostic Note
Cruise Indicator Cruise control indicator status / ON or OFF ON: Cruise control indicator illuminated
OFF: Cruise control indicator not illuminated
-



Result:
Result Proceed to
The cruise control indicator illuminates and turns off according to the operation of the cruise control main switch (ON-OFF). A
The cruise control indicator does not illuminate but the Data List items change according to the operation of the cruise control main switch (ON-OFF). B
The cruise control indicator does not illuminate and the Data List items do not change according to the operation of the cruise control main switch (ON-OFF). C



A

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

B

REPLACE COMBINATION METER ASSEMBLY

C