Home › Engine / Hybrid System › CRUISE CONTROL › CAMERA HEATER › from 2020.08
RM27T0E _51 Engine / Hybrid System _053696 CRUISE CONTROL _0438786 CAMERA HEATER A

CRUISE CONTROL  CAMERA HEATER  REMOVAL  


PROCEDURE

Hide 8646C 1.REMOVE FORWARD RECOGNITION CAMERA

Hide 86401 2.REMOVE FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY

NOTICE:
B587680C02
0,0 0,0 false
V100155

Inner Surface of Forward Recognition with Heater Hood Sub-assembly


·

Do not touch the inner surface of the forward recognition with heater hood sub-assembly.

·

Do not apply force to the heating element of the forward recognition with heater hood sub-assembly or an open circuit may result.



a.
B587681

Disconnect the connector.

NOTICE:

When disconnecting the connector, do not forcibly pull the wire harness.



b.
B587682

Detach the connector clamp.


c.
B587683C05
0.583,3.208 0.594,3.042 0.594,3.042 0.677,3.042 true 0.677,4.063 0.646,3.885 0.646,3.885 0.542,3.885 true 0.708,2.969 1.021,3.167 0.313,0.198 10 false *a 1.75,3.25 1.906,3.448 0.156,0.198 10 true 1 1.771,3.719 1.927,3.917 0.156,0.198 10 true 2 0.385,3.813 0.698,4.01 0.313,0.198 10 false *a
*a Wire Harness


Detach the wire harness from the guide in the order shown in the illustration.

NOTICE:

Do not pull the harness forcibly when remove the wire harness.



d.
B587684C03
0,0 0,0 false
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)
V100155

Heater Area


Push the 2 claws and pull the forward recognition with heater hood sub-assembly in the direction indicated by the arrow (1) in the illustration to detach the 2 claws.

NOTICE:

Do not press the heater area.



e.

Pull the forward recognition with heater hood sub-assembly in the direction indicated by the arrow (2) as shown in the illustration to detach the 2 guides and remove the forward recognition with heater hood sub-assembly.