86401
1.INSTALL FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY
|
Inner Surface of Forward Recognition with Heater Hood Sub-assembly |
Do not touch the inner surface of the forward recognition with heater hood sub-assembly.
Do not apply force to the heating element of the forward recognition with heater hood sub-assembly or an open circuit may result.
|
Install in this Direction (1) |
|
Install in this Direction (2) |
|
Heater Area |
Insert the forward recognition with heater hood sub-assembly in the direction indicated by the arrow (1) as shown in the illustration to attach the 2 guides.
Attach the 2 claws in the direction indicated by the arrow (2) as shown in the illustration.
Make sure that the 2 claws are engaged as shown in the illustration. Failure to do so may result in the malfunction of systems that use the forward recognition camera.
Do not apply force to the heating element of the forward recognition with heater hood sub-assembly or an open circuit may result.
Check the locking sound of the claw when attaching it.
| *a | Wire Harness |
Install the wire harness to the guide in the order shown in the illustration.
As the No. 1 forward recognition cover cannot be installed correctly if the guides are not attached securely, make sure to attach each clamp and guide securely.
Do not forcibly pull the wire harness as it may become damaged.
Attach the connector clamp to install the forward recognition with heater hood sub-assembly.
As the No. 1 forward recognition cover cannot be installed correctly if the clamp are not attached securely, make sure to attach each clamp and guide securely.
Connect the connector.
8646C
2.INSTALL FORWARD RECOGNITION CAMERA