8646C
1.INSTALL FORWARD RECOGNITION CAMERA
When replacing the forward recognition camera, replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle and a DTC may be stored.
Do not touch the camera lens. If the camera lens has been touched, do not use the forward recognition camera.
If the forward recognition camera has been struck or dropped, replace it with a new one.
If the forward recognition camera is not properly installed, forward recognition camera optical axis learning cannot be performed properly. Make sure the forward recognition camera is installed securely.
Replace the forward recognition camera if there is any foreign matter on the camera lens.
When replacing the windshield glass of a vehicle equipped with a forward recognition camera, make sure to use a Toyota genuine part. If a non-Toyota genuine part is used, the forward recognition camera may not be able to be installed due to a missing bracket. Also, the dynamic radar cruise control system, front camera system, lane departure alert system, road sign assist system, pre-collision system or automatic high beam system may not operate properly due to a difference in the transmissivity or black ceramic border.
If the forward recognition camera bracket is deformed or damaged, replace it together with the windshield glass.
If there is any foreign matter on the area of the windshield glass in front of the forward recognition camera, clean the windshield glass before installing the forward recognition camera.
If there is any foreign matter on the area of the windshield glass in front of the forward recognition camera, clean the windshield glass before installing the forward recognition camera. Install the hood with heater sub-assembly and forward recognition camera.
Forward recognition hood removal: Click hereEngine / Hybrid System>CRUISE CONTROL>CAMERA HEATER>REMOVAL
Forward recognition hood installation: Click hereEngine / Hybrid System>CRUISE CONTROL>CAMERA HEATER>INSTALLATION
When using a new forward recognition camera:
Remove the protective film.
Do not touch the camera lens after removing the protective film.
|
Install in this Direction |
Attach the 4 guides to install the forward recognition camera as shown in the illustration.
Do not touch the camera lens.
Connect the connector.
86464A
2.INSTALL FORWARD RECOGNITION LATCH
Before installing the forward recognition latch, be sure to check that the forward recognition camera is securely installed.
| *a | Make sure that the claw is securely attached. |
|
Install in this Direction |
Attach the 4 guides and 2 claws to install the forward recognition latch as shown in the illustration.
Check that the forward recognition latch is securely installed.
86466D
3.INSTALL NO. 1 FORWARD RECOGNITION COVER
|
Install in this Direction |
Attach the 2 guides and 2 clips as shown in the illustration to install the No. 1 forward recognition cover.
When installing, press the cover parallel to the windshield glass surface and install.
86466E
4.INSTALL NO. 2 FORWARD RECOGNITION COVER
|
Install in this Direction (1) |
|
Install in this Direction (2) |
Attach the 2 guides in direction indicated by arrow (1) shown in the illustration.
Attach the 2 claws in the direction of arrow (2) shown in the illustration to install the No. 2 forward recognition cover.
If the 2 claws are attached separately they may become damaged. Therefore, attach them at the same time.
8646C
5.ADJUST FORWARD RECOGNITION CAMERA
If the forward recognition camera has been replaced or the windshield glass has been removed and installed, it is necessary to perform Forward Recognition Camera Learning.
Forward Recognition Camera Learning can be performed by using either One Time Recognition or Sequential Recognition.
One Time Recognition: Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT CAMERA>ADJUSTMENT (ONE TIME RECOGNITION)
Sequential Recognition: Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT CAMERA>ADJUSTMENT (SEQUENTIAL RECOGNITION)