Home › Suspension › SUSPENSION CONTROL › KINETIC DYNAMIC SUSPENSION SYSTEM › from 2020.08
RM27T0E _53 Suspension _053706 SUSPENSION CONTROL _0260886 KINETIC DYNAMIC SUSPENSION SYSTEM U

SUSPENSION CONTROL  KINETIC DYNAMIC SUSPENSION SYSTEM  TERMINALS OF ECU  


U148451E02
1.219,0.104 1.844,0.469 0.625,0.365 10 false *a 3.365,0.24 3.76,0.427 0.396,0.188 10 false G123

Text in Illustration
*a Component with harness connected
(Stabilizer Control ECU)
- -

Terminal No.
(Symbol)
Wiring Color Terminal Description Condition Specified Condition
G123-1 (SLAL) - Body ground LG - Body ground Stabilizer control solenoid valve output signal (for Upper Chamber) Ignition switch ON
Vehicle stopped
Below 1 V
G123-3 (SLAU) - Body ground P - Body ground Stabilizer control solenoid valve output signal (for Lower Chamber) Ignition switch ON
Vehicle stopped
Below 1 V
G123-7 (SGP1) - Body ground G - Body ground Pressure sensor ground Always Below 1 V
G123-15 (SBP1) - Body ground V - Body ground Power source (Pressure sensor) Ignition switch ON 4.75 to 5.25 V
G123-17 (SOP1) - Body ground W - Body ground Pressure sensor input signal Ignition switch ON 0.4 to 4.6 V
G123-22 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
G123-24 (IG) - Body ground B - Body ground Power source Ignition switch ON 11 to 14 V
G123-28 (CANL) - G123-29 (CANH) W - V CAN communication line Ignition switch off 54 to 69 Ω