IGNITION SWITCH EXPRESSION
The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.
| Expression | Ignition Switch (position) | Engine Switch (condition) |
|---|---|---|
| Ignition Switch off | Off | Off |
| Ignition Switch ON | ON | On (IG) |
| Ignition Switch ACC | ACC | On (ACC) |
| Engine Start | START | Start |
DOOR CONTROL RECEIVER EXPRESSION
The type of door control receiver used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.
| Vehicle Specification | Part Name in Manual | Actual Part Name |
|---|---|---|
| for 12 Pin Type, with Entry and Start System | Door control receiver | Electrical key & TPMS receiver assembly |
| for 12 Pin Type, without Entry and Start System | Door control receiver | Door control & tire pressure monitoring system receiver assembly |
| for 5 Pin Type, with Entry and Start System | Door control receiver | Smart Door control receiver |
| for 5 Pin Type, without Entry and Start System | Door control receiver | Door control receiver |
KEY EXPRESSION
The type of key used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.
| Vehicle Specification | Part Name in Manual | Actual Part Name |
|---|---|---|
| w/ Entry and Start System | Electrical key transmitter sub-assembly | Electrical key transmitter sub-assembly |
| w/o Entry and Start System | Electrical key transmitter sub-assembly | Door control transmitter assembly |
PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL
After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) battery terminal.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
When disconnecting and reconnecting the battery
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART
PRECAUTION WHEN REPLACING THEFT WARNING ULTRASONIC SENSOR
When replacing the theft warning ultrasonic sensor, always replace it with a one having the same part number.