8598A
1.INSTALL DOOR CONTROL BATTERY (w/o Stop and Start System)
Attach the hook.
Install the door control battery with the nut.
8598A
2.INSTALL DOOR CONTROL BATTERY (w/ Stop and Start System)
Install the door control battery with 2 nuts.
Connect the connector and attach the 2 clamps.
3.INSTALL DRIVER SIDE JUNCTION BLOCK ASSEMBLY WITH MAIN BODY ECU
4. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART
5.CHECK SRS WARNING LIGHT