Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM (w/ VSC) › from 2020.08
RM27T0E _55 Steering _053717 POWER ASSIST SYSTEMS _0260945 POWER STEERING SYSTEM(w/ VSC) C

POWER ASSIST SYSTEMS  POWER STEERING SYSTEM(w/ VSC)  C1544  High Engine Revolution Signal  


DESCRIPTION

The power steering ECU receives engine speed signals from the ECM via CAN communication. The power steering ECU provides appropriate assisting force in accordance with the engine speed signal.

DTC Code DTC Detection Condition Trouble Area
C1544 An abnormal engine speed signal is received.
·

Engine control system

·

CAN communication system

·

Power steering ECU assembly



PROCEDURE

1.CHECK OTHER DTC OUTPUT (CAN COMMUNICATION SYSTEM)
a.

Check if DTC U0100 is output (See page Steering>POWER ASSIST SYSTEMS>POWER STEERING SYSTEM (w/ VSC)>DTC CHECK / CLEAR).

Result
Result Proceed to
DTC U0100 is not output. A
DTC U0100 is output. B

HINT:

DTC U0100 indicates a CAN communication malfunction in the power steering system.




A

2.CHECK ENGINE TYPE

B

REPAIR CIRCUIT INDICATED BY OUTPUTCODE

2.CHECK ENGINE TYPE
a.

Check the engine type.

Result
Result Proceed to
2TR-FE A
1GR-FE B
1GD-FTV C



A

3.CHECK OTHER DTC OUTPUT (ENGINE CONTROL SYSTEM)

B

4.CHECK OTHER DTC OUTPUT (ENGINE CONTROL SYSTEM)

C

5.CHECK OTHER DTC OUTPUT (ENGINE CONTROL SYSTEM)
3.CHECK OTHER DTC OUTPUT (ENGINE CONTROL SYSTEM)
a.

Using the GTS, check for DTCs and confirm that there are no problems in the engine control system (See page Engine / Hybrid System>2TR-FE (ENGINE CONTROL)>SFI SYSTEM>DTC CHECK / CLEAR).

Result
Result Proceed to
DTC is not output. A
DTC is output. B



A

REPLACE POWER STEERING ECU ASSEMBLY

B

GO TO SFI SYSTEM (DIAGNOSTIC TROUBLE CODE CHART)

4.CHECK OTHER DTC OUTPUT (ENGINE CONTROL SYSTEM)
a.

Using the GTS, check for DTCs and confirm that there are no problems in the engine control system (See page Engine / Hybrid System>1GR-FE (ENGINE CONTROL)>SFI SYSTEM>DTC CHECK / CLEAR).

Result
Result Proceed to
DTC is not output. A
DTC is output. B



A

REPLACE POWER STEERING ECU ASSEMBLY

B

GO TO SFI SYSTEM (DIAGNOSTIC TROUBLE CODE CHART)

5.CHECK OTHER DTC OUTPUT (ENGINE CONTROL SYSTEM)
a.

Using the GTS, check for DTCs and confirm that there are no problems in the engine control system (See page Engine / Hybrid System>1GD-FTV (ENGINE CONTROL)>ECD SYSTEM>DTC CHECK / CLEAR for 1GD-FTV, Engine / Hybrid System>1GD-FTV (ENGINE CONTROL)>ECD SYSTEM (w/ Urea SCR System)>DTC CHECK / CLEAR for 1GD-FTV (w/ Urea SCR System)).

Result
Result Proceed to
DTC is not output. A
DTC is output. (for 1GD-FTV) B
DTC is output. (for 1GD-FTV (w/ Urea SCR System)) C



A

REPLACE POWER STEERING ECU ASSEMBLY

B

GO TO ECD SYSTEM (DIAGNOSTIC TROUBLE CODE CHART)

C