Home › Steering › STEERING COLUMN › TILT AND TELESCOPIC MANUAL SWITCH › from 2020.08
RM27T0E _55 Steering _053718 STEERING COLUMN _0260961 TILT AND TELESCOPIC MANUAL SWITCH A

STEERING COLUMN  TILT AND TELESCOPIC MANUAL SWITCH  INSTALLATION  


PROCEDURE

Hide 89235A 1.INSTALL TILT AND TELESCOPIC SWITCH

a.

Attach the claw to install the tilt and telescopic switch.


b.

Connect the connector.


Hide 45287 2.INSTALL STEERING COLUMN LOWER COVER

a.

Install the 3 screws.


b.

Attach the 2 claws to install the steering column lower cover.

NOTICE:

Do not damage the tilt and telescopic switch.



Hide 3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Hide 4. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE

HINT:

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART