77269A
1.INSTALL FUEL TANK BREATHER HOSE
Install the fuel tank breather hose to the fuel sub tank sub-assembly.
77213B
2.INSTALL FUEL TANK TO FILLER PIPE HOSE
Install the fuel tank to filler pipe hose to the fuel sub tank sub-assembly.
77010
3.INSTALL FUEL TANK VENT TUBE ASSEMBLY
Install a new gasket and fuel tank vent tube assembly with the 8 screws.
Attach the wire harness clamp.
77100Z
4.INSTALL FUEL SUB TANK SUB-ASSEMBLY
Set the fuel sub tank sub-assembly on an engine lifter and lift up the engine lifter.
Connect the 2 fuel tank bands with the 4 bolts.
Connect the fuel sender gauge assembly connector.
77269A
5.CONNECT FUEL TANK BREATHER HOSE
Connect the fuel tank breather hose to the filler pipe.
77213B
6.CONNECT FUEL TANK TO FILLER PIPE HOSE
Connect the fuel tank to filler pipe hose to the filler pipe.
7.CONNECT FUEL HOSE
Connect the fuel evaporation hose, fuel breather hose and fuel hose.
77606C
8.INSTALL NO. 2 FUEL TANK PROTECTOR
Install the No. 2 fuel tank protector with the 5 bolts.
9.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
10. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART
11.INSPECT FOR FUEL LEAK