Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › MULTI-TERRAIN MONITOR SYSTEM › from 2020.08
RM27T0E _56 Audio / Visual / Telematics _053722 PARK ASSIST / MONITORING _0328431 MULTI-TERRAIN MONITOR SYSTEM D

PARK ASSIST / MONITORING  MULTI-TERRAIN MONITOR SYSTEM  SYSTEM DESCRIPTION  


GENERAL


a.

This system has front, passenger side, driver side and rear television camera assemblies mounted around the vehicle to display around the vehicle on the radio and display receiver assembly. The display panel also shows a composite view consisting of the area behind the vehicle and parking guidelines to assist the driver in parking the vehicle by monitoring the area around the vehicle.


b.

This system consists of the following components:

i.

Parking assist ECU


ii.

Panoramic view monitor switch (multi-terrain monitor switch)


iii.

Rear television camera assembly


iv.

Front television camera assembly


v.

Side television camera assembly LH


vi.

Side television camera assembly RH


vii.

Radio and display receiver assembly


viii.

Steering sensor


ix.

Brake actuator assembly (skid control ECU)*1


x.

Master cylinder solenoid (Skid control ECU)*2


xi.

Main body ECU (multiplex network body ECU)


xii.

Clearance warning ECU assembly


xiii.

ECM


xiv.

4WD control ECU


xv.

Airbag sensor assembly


xvi.

Blind spot monitor sensor LH*3

*1: for Vacuum Brake Booster

*2: for Hydraulic Brake Booster

*3: w/ Blind Spot Monitor System




c.

This system is equipped with a self-diagnosis system, which is operated from a designated window that appears on the display panel, just as in the navigation system.



FUNCTION OF COMPONENTS


a.

The parking assist ECU controls the system by using information from the following components.

E454380E01
0.188,0.688 2.146,1.188 1.958,0.5 10 false Panoramic View Monitor Switch (Multi-terrain Monitor Switch) 0.115,2.292 2.333,2.781 2.219,0.49 10 false Front Television Camera Assembly 0.115,3.729 2.594,4.177 2.479,0.448 10 false Side Television Camera Assembly LH 0.104,5.104 2.583,5.552 2.479,0.448 10 false Side Television Camera Assembly RH 0.125,6.458 2.604,6.906 2.479,0.448 10 false Rear Television Camera Assembly 0.74,8.073 2.271,8.396 1.531,0.323 10 false : Analog Display Signal 0.708,8.479 2.76,8.729 2.052,0.25 10 false : CAN Communication Line 4.667,1.448 7.125,1.667 2.458,0.219 10 false Radio and Display Receiver Assembly 5.385,2.813 6.51,3.031 1.125,0.219 10 false Steering Sensor 5.594,7.917 6.073,8.219 0.479,0.302 10 false ECM 4.583,5.01 7.01,5.615 2.427,0.604 10 false Brake Actuator Assembly (Skid Control ECU)*1 or Master Cylinder Solenoid (Skid Control ECU)*2 0.094,7.125 2.021,7.354 1.927,0.229 10 false *1: for Vacuum Brake Booster 0.104,7.604 2.052,7.823 1.948,0.219 10 false *2: for Hydraulic Brake Booster 4.833,6.688 6.99,7.125 2.156,0.438 10 false Main Body ECU (Multiplex Network ECU) 5.26,3.917 6.448,4.24 1.188,0.323 10 false 4WD Control ECU

E381375E01
0.146,3.708 2.365,3.99 2.219,0.281 10 false *: w/ Blind Spot Monitor System 0.76,4.333 2.979,4.615 2.219,0.281 10 false : CAN Communication Line 4.885,3.563 7.104,3.844 2.219,0.281 10 false Blind Spot Monitor Sensor LH* 5.083,2.208 6.833,2.49 1.75,0.281 10 false Airbag Sensor Assembly 4.854,0.896 7.063,1.26 2.208,0.365 10 false Clearance Warning ECU Assembly

Item Function
Rear Television Camera Assembly
·

Mounted on the back door to transmit the rear view of the vehicle to the parking assist ECU.

·

Has a color video camera that uses a Complementary Metal Oxide Semiconductor (CMOS) and a wide-angle lens


Front Television Camera Assembly Generates a video feed showing the front side of the vehicle and transmits the video to the parking assist ECU
Side Television Camera Assembly LH Generates a video feed showing the left side of the vehicle and transmits the video to the parking assist ECU
Side Television Camera Assembly RH Generates a video feed showing the right side of the vehicle and transmits the video to the parking assist ECU
Parking Assist ECU
·

Turns the multi-terrain monitor system ON and OFF according to the display conditions, based on the received panoramic view monitor switch (multi-terrain monitor switch) signals, shift position signals, and vehicle speed signals

·

Sends the display request signals for the panoramic view and wide front view screen, two-side view screen, panoramic view and rear view screen, or moving view screen to the radio receiver assembly according to the display conditions, based on the received panoramic view monitor switch (multi-terrain monitor switch) signals, shift position signals, and vehicle speed signals

·

Sends the display switching request signals for the panoramic view and wide front view screen, two-side view screen, panoramic view and rear view screen, or moving view screen to the radio receiver assembly according to the display conditions, based on the received outer mirror retraction signals

·

Displays the composite image of the surrounding area images taken by each camera and the image calculated from vehicle status information such as the steering angle signals on the display screen

·

Renders each configuration page in the diagnosis window and outputs the screen to the radio and display receiver assembly

·

Stops displaying the buttons and guidelines on the panoramic view and rear view monitor screen when the screen is being displayed and a back door open status signal is received

·

Stores each configuration setting from the diagnosis window


Panoramic view monitor switch (multi-terrain monitor switch) Sends switch operation signals to the parking assist ECU
Radio and Display Receiver Assembly
·

Allows touch panel operations when the multi-terrain monitor screen or diagnosis screen is displayed

·

Sends the communication flag signal to the parking assist ECU via the CAN communication system


Steering Sensor Sends the steering angle signals and sensor status signals to the parking assist ECU via the CAN communication system
Brake Actuator Assembly (Skid Control ECU)*1
Master Cylinder Solenoid (Skid Control ECU)*2
Sends the vehicle speed signals, drive type signals, and system status signals to the parking assist ECU via the CAN communication system
ECM
·

Sends the engine model signals, and system status signals to the parking assist ECU via the CAN communication system

·

Sends the shift position signals to the parking assist ECU via the CAN communication system


Main Body ECU (Multiplex Network Body ECU)
·

Sends the back door courtesy light switch signal to the parking assist ECU via the CAN communication system

·

Sends the mirror retract request signal to the parking assist ECU via the CAN communication system


Clearance Warning ECU Assembly Sends information from each sonar via the CAN communication system
Master Cylinder Solenoid (Skid Control ECU) Sends vehicle speed signals to the parking assist ECU via CAN communication.
4WD Control ECU Sends L4 condition signals to the parking assist ECU via CAN communication.
Airbag Sensor Assembly Sends acceleration sensor information to the parking assist ECU via CAN communication.
Steering Control ECU Sends VGRS relative angle signals to the parking assist ECU via CAN communication.
Blind Spot Monitor Sensor LH*3 Sends RCTA operation condition signals to the parking assist ECU via CAN communication.

*1: for Vacuum Brake Booster

*2: for Hydraulic Brake Booster

*3: w/ Blind Spot Monitor System




Multi-terrain Monitor Screen Display


a.

Panoramic view and wide front view screen

E453530E01
0.5,1.167 1.083,1.167 true 1.083,1.167 1.156,1.552 true 1.083,1.167 1.333,1.5 true 2.885,0.927 3.188,0.354 true 2.844,0.885 3.094,0.344 3.094,0.344 3.26,0.344 true 3.167,2.5 3,2.5 3,2.5 2.917,1.417 true 4.417,1.188 4.677,1.51 true 4.438,1.208 4.5,1.552 true 3.833,1.198 4.417,1.198 true 6.188,0.875 6.417,0.333 6.417,0.333 6.583,0.333 true 6.25,0.896 6.49,0.323 true 0.583,0.5 0.896,0.698 0.313,0.198 10 false *a 3.927,0.5 4.24,0.698 0.313,0.198 10 false *b 0.333,1.094 0.646,1.292 0.313,0.198 10 false 1 3.333,0.292 3.646,0.49 0.313,0.198 10 false 1 3.25,2.385 3.563,2.583 0.313,0.198 10 false 2 3.667,1.135 3.979,1.333 0.313,0.198 10 false 1 6.74,0.229 7.052,0.427 0.313,0.198 10 false 1

Text in Illustration
*a Estimated course line display mode *b Distance guide line display mode

Panoramic View and Wide Front View Screen Description
Signal Name Color Panoramic View and Wide Front View Screen
Estimated course line display mode Distance guide line display mode
(1) Front distance guide line Blue Displayed Displayed
(2) Front wheel ground contact line Yellow Displayed Not displayed


b.

Two-side view screen description

E453531E01
2.24,1.313 2.771,0.521 2.771,0.521 2.854,0.521 true 2.292,1.448 3.219,1.448 true 2.219,1.573 2.469,2.281 2.469,2.281 2.573,2.281 true 5.656,1.313 6.177,0.521 6.177,0.521 6.26,0.521 true 5.698,1.438 6.615,1.438 true 5.656,1.594 5.906,2.302 5.906,2.302 6,2.302 true 0.49,0.458 0.74,0.646 0.25,0.188 10 false *a 2.938,0.427 3.188,0.615 0.25,0.188 10 false 1 3.281,1.365 3.531,1.552 0.25,0.188 10 false 3 2.635,2.198 2.885,2.385 0.25,0.188 10 false 2 3.865,0.458 4.115,0.646 0.25,0.188 10 false *b 6.313,0.396 6.563,0.583 0.25,0.188 10 false 1 6.656,1.354 6.906,1.542 0.25,0.188 10 false 3 6.063,2.219 6.313,2.406 0.25,0.188 10 false 2

Text in Illustration
*a Estimated course line display mode *b Distance guide line display mode

Two-side View Screen Description
Signal Name Color
(1) Front distance guide line Red/Black
(2) Front wheel ground contact line Blue
(3) Vehicle width parallel line Blue Blue


c.

Panoramic view and rear view screen

E453532E01
0.5,1.75 0.417,2.417 0.417,2.417 0.25,2.417 true 0.917,1.333 0.667,2.583 0.667,2.583 0.5,2.583 true 1.76,0.917 1.646,0.427 1.646,0.427 1.479,0.427 true 1.698,0.927 1.563,0.427 true 1.75,1.75 1.917,2.583 1.917,2.583 2.083,2.583 true 1.833,1.531 2,2.083 2,2.083 2.167,2.083 true 1.979,1.042 2.208,0.396 2.208,0.396 2.375,0.396 true 0.823,1.198 0.438,0.979 0.438,0.979 0.271,0.979 true 1.146,1.25 0.708,0.396 0.708,0.396 0.542,0.396 true 1.188,1.406 1.354,2.24 1.354,2.24 1.521,2.24 true 1.031,1.458 1.24,2.573 1.24,2.573 1.406,2.573 true 2.99,1.781 2.958,2.104 2.958,2.104 2.792,2.104 true 3.25,1.354 3,2.604 3,2.604 2.833,2.604 true 3.344,1.448 3.552,2.563 3.552,2.563 3.719,2.563 true 4.094,1.563 4.219,2.146 4.219,2.146 4.385,2.146 true 4.094,0.896 3.979,0.406 3.979,0.406 3.813,0.406 true 4.031,0.906 3.896,0.406 true 3.021,1.24 2.635,1.021 2.635,1.021 2.469,1.021 true 3.406,1.135 3.177,0.188 3.177,0.188 3.01,0.188 true 5.281,1.75 5.25,2.073 5.25,2.073 5.083,2.073 true 6.406,0.896 6.292,0.406 6.292,0.406 6.125,0.406 true 6.365,0.917 6.229,0.417 true 6.417,1.563 6.51,2.135 6.51,2.135 6.677,2.135 true 5.688,1.458 5.833,2.302 5.833,2.302 6,2.302 true 0.219,0.552 0.531,0.75 0.313,0.198 10 false *a 2.51,0.573 2.823,0.771 0.313,0.198 10 false *b 4.823,0.552 5.135,0.75 0.313,0.198 10 false *c 0.083,2.333 0.396,2.531 0.313,0.198 10 false *d 0.313,2.521 0.625,2.719 0.313,0.198 10 false *8 1.281,0.333 1.594,0.531 0.313,0.198 10 false *1 2.167,2.5 2.479,2.698 0.313,0.198 10 false *7 2.24,2.01 2.552,2.208 0.313,0.198 10 false *2 2.438,0.323 2.75,0.521 0.313,0.198 10 false *6 0.073,0.906 0.385,1.104 0.313,0.198 10 false *7 0.354,0.313 0.667,0.51 0.313,0.198 10 false *3 1.583,2.167 1.896,2.365 0.313,0.198 10 false *5 1.49,2.479 1.802,2.677 0.313,0.198 10 false *2 2.625,2.021 2.938,2.219 0.313,0.198 10 false *d 2.635,2.531 2.948,2.729 0.313,0.198 10 false *8 3.75,2.479 4.063,2.677 0.313,0.198 10 false *2 4.448,2.063 4.76,2.26 0.313,0.198 10 false *2 3.656,0.313 3.969,0.51 0.313,0.198 10 false *1 2.271,0.958 2.583,1.156 0.313,0.198 10 false *3 2.833,0.125 3.146,0.323 0.313,0.198 10 false *4 4.917,2 5.229,2.198 0.313,0.198 10 false *d 5.938,0.323 6.25,0.521 0.313,0.198 10 false *1 6.75,2.073 7.063,2.271 0.313,0.198 10 false *2 6.083,2.208 6.396,2.406 0.313,0.198 10 false *2

Text in Illustration
*a Estimated course line display mode *b Parking guide line display mode
*c Distance guide line display mode *d Guide line display mode switching button

HINT:

In the rear view screen, the screen display mode can be switched by pressing the guide line display mode switching button or rear view screen on the screen.


Panoramic View and Rear View Screen Description
Signal Name Color Panoramic View and Rear View Screen
Estimated course line display mode Parking guide line display mode Distance guide line display mode
(1) Front distance guide line Blue Displayed Displayed Displayed
(2) Rear distance guide line Red/Black Displayed Displayed Displayed
(3) Rear vehicle width extension line Blue Displayed Displayed Not displayed
(4) Parking guide line Blue Not displayed Displayed Not displayed
(5) Rear distance guide line Blue Displayed Not displayed Not displayed
(6) Side estimated course line Yellow Displayed Not displayed Not displayed
(7) Rear estimated course line Yellow Displayed Not displayed Not displayed
(8) Vehicle center line Blue Displayed Displayed Not displayed


d.

Rear view screen

E453533E01
0.552,1.906 0.5,2.333 0.5,2.333 0.396,2.333 true 2.854,1.906 2.792,2.333 2.792,2.333 2.698,2.333 true 5.167,1.906 5.104,2.333 5.104,2.333 5.01,2.333 true 1.24,1.458 1.448,2.365 1.448,2.365 1.521,2.365 true 3.573,1.458 3.375,2.354 3.375,2.354 3.292,2.354 true 1.552,1.521 1.719,2.052 1.719,2.052 1.771,2.052 true 1.479,1.542 1.615,2.177 1.615,2.177 1.667,2.177 true 5.979,1.563 5.979,2.167 true 3.865,1.531 3.865,2.104 true 1.104,1.281 1.281,0.531 1.281,0.531 1.354,0.531 true 1.531,1.385 1.76,0.646 1.76,0.646 1.823,0.646 true 3.365,1.198 3.458,0.563 3.458,0.563 3.531,0.563 true 0.146,0.24 0.417,0.49 0.271,0.25 10 false *a 0.208,2.24 0.479,2.49 0.271,0.25 10 false *d 2.469,0.292 2.74,0.542 0.271,0.25 10 false *b 4.813,0.323 5.083,0.573 0.271,0.25 10 false *c 2.49,2.24 2.76,2.49 0.271,0.25 10 false *d 1.573,2.292 1.844,2.542 0.271,0.25 10 false 6 1.844,1.979 2.021,2.146 0.177,0.167 10 false 1 1.896,0.552 2.073,0.719 0.177,0.167 10 false 2 3.615,0.5 3.792,0.667 0.177,0.167 10 false 3 1.719,2.104 1.896,2.271 0.177,0.167 10 false 4 1.427,0.438 1.604,0.604 0.177,0.167 10 false 5 3.823,2.146 4,2.313 0.177,0.167 10 false 1 5.938,2.208 6.115,2.375 0.177,0.167 10 false 1 4.833,2.25 5.104,2.5 0.271,0.25 10 false *d 3.167,2.271 3.438,2.521 0.271,0.25 10 false 6

Text in Illustration
*a Estimated course line display mode *b Parking guide line display mode
*c Distance guide line display mode *d Guide line display mode switching button

HINT:

The screen changes to the panoramic view and rear view screen when the display mode switch button or rear view screen is selected.


Panoramic View and Rear View Screen Description
Signal Name Color Rear View Screen
Estimated course line display mode Parking guide line display mode Distance guide line display mode
(1) Rear distance guide line Red/Black Displayed Displayed Displayed
(2) Rear vehicle width extension line Blue Displayed Displayed Not displayed
(3) Parking guide line Blue Not displayed Displayed Not displayed
(4) Rear distance guide line Blue Displayed Not displayed Not displayed
(5) Rear estimated course line Yellow Displayed Not displayed Not displayed
(6) Vehicle center line Blue Displayed Displayed Not displayed


e.

Side view screen

E453534E01
2.573,1.021 2.708,0.427 2.708,0.427 2.813,0.427 true 2.615,1.323 2.906,0.927 2.906,0.927 3.198,0.927 true 2.688,1.615 3.198,1.615 true 2.594,1.969 2.594,2.219 true 5.927,1.021 6.063,0.427 6.063,0.427 6.156,0.427 true 5.958,1.323 6.26,0.927 6.26,0.927 6.552,0.927 true 6.031,1.625 6.552,1.625 true 5.938,1.969 5.938,2.219 true 0.281,0.188 0.552,0.406 0.271,0.219 10 false *a 2.875,0.344 3.031,0.521 0.156,0.177 10 false 1 3.271,0.844 3.427,1.021 0.156,0.177 10 false 2 3.26,1.531 3.417,1.708 0.156,0.177 10 false 3 2.563,2.271 2.719,2.448 0.156,0.177 10 false 4 6.198,0.333 6.354,0.51 0.156,0.177 10 false 1 6.604,0.833 6.76,1.01 0.156,0.177 10 false 2 6.604,1.542 6.76,1.719 0.156,0.177 10 false 3 5.906,2.26 6.063,2.438 0.156,0.177 10 false 4 3.813,0.219 4.083,0.438 0.271,0.219 10 false *b

Text in Illustration
*a Estimated course line display mode *b Parking guide line display mode

Side View Screen Description
Signal Name Color
(1) Front wheel ground contact line Blue
(2) Rear wheel ground contact line Blue
(3) Vehicle width parallel line Blue

HINT:

Refer to the content of panoramic view and rear view screen and panoramic view and wide front view screen for information about the rear view and wide front view screens.




Multi-terrain Monitor Screen Description (ON LOAD)


a.

Manual display mode

i.

When the panoramic view monitor switch (multi-terrain monitor switch) is pressed with the engine switch on (IG) or the engine started, the multi-terrain monitor system switches to a screen shown below according to the shift lever position

E453535E01
0.427,0.656 0.74,0.854 0.313,0.198 10 false *a 2.375,2.76 2.927,2.99 0.552,0.229 10 false 5 or 6 4.469,2.146 4.781,2.344 0.313,0.198 10 false 1 0.448,5.385 0.76,5.583 0.313,0.198 10 false *b 5.833,2.125 6.146,2.323 0.313,0.198 10 false *d 3.49,1.094 3.802,1.292 0.313,0.198 10 false 1 1.635,2.74 1.948,2.938 0.313,0.198 10 false 4 1.156,3.729 1.469,3.927 0.313,0.198 10 false 4 3.75,3.781 4.063,3.979 0.313,0.198 10 false *e 5.656,7.604 5.969,7.802 0.313,0.198 10 false *c 3.583,6.479 3.917,6.677 0.333,0.198 10 false 1 3.583,7.448 3.917,7.646 0.333,0.198 10 false 1 1.219,6.802 1.531,7 0.313,0.198 10 false *f 1.281,8.354 1.594,8.552 0.313,0.198 10 false *g 1.802,6.906 2.135,7.104 0.333,0.198 10 false 7 0.719,6.896 1.052,7.094 0.333,0.198 10 false 8 0.479,3.729 0.792,3.927 0.313,0.198 10 false 2 1.625,4.896 1.938,5.094 0.313,0.198 10 false 2 2.354,4.875 2.906,5.104 0.552,0.229 10 false 3 or 5

Text in Illustration
*a Shift lever not in P or R *b Shift lever in R
*c Panoramic view and wide front view screen *d Two-side view screen
*e Navigation screen, etc. *f Panoramic view and rear view screen
*g Wide rear view screen - -

Screen Transition Conditions
No. Screen Transition Conditions
(1) Panoramic view monitor switch (multi-terrain monitor switch) is pressed
(2) Shift lever is moved to R
(3) Shift lever is moved to other than P or R
(4) Shift lever is moved to other than P or R and operation (1) is performed
(5) "MAP/VOICE" switches, etc. on the display are pressed
(6) Shift lever is moved to P
(7) Switch image mode button or rear view screen is selected
(8) Switch image mode button or wide rear view screen is selected

HINT:

If the panoramic view monitor switch (multi-terrain monitor switch) is pressed at a vehicle speed of approximately 20 km/h (12 mph) or lower, the multi-terrain monitor screen is displayed. If the vehicle speed exceeds approximately 20 km/h (12 mph), the display switches to the navigation screen or information settings screen.




b.

Screen transition chart (automatic display mode)

i.

When the shift lever is not in P or R, in addition to switching screens by pressing the panoramic view monitor switch (multi-terrain monitor switch), the automatic display mode can be selected by pressing the automatic display mode switching button.

E453536E01
0.833,2.333 0.917,2.333 0.917,2.333 1,2.083 true 4.167,2.333 4.25,2.333 4.25,2.333 4.333,2.083 true 0.688,0.479 1,0.677 0.313,0.198 10 false *a 4.115,0.469 4.427,0.667 0.313,0.198 10 false *b 0.583,2.25 0.896,2.448 0.313,0.198 10 false *c 3.938,2.25 4.25,2.448 0.313,0.198 10 false *c

Text in Illustration
*a Panoramic view and wide front view screen *b Two-side view screen
*c Automatic display mode - -

Automatic Display Mode Switching Button
(Indicator in Button)
Screen Switching Mode
ON
(Illuminated)
Automatic display mode
OFF
(Not illuminated)
Manual display mode

HINT:
·

In the automatic display mode, press the panoramic view monitor switch (multi-terrain monitor switch) or panel switch to switch screens in the same way as the manual display mode.

·

When switching to the navigation screen, etc. in the automatic display mode, the display switches to the screen that was displayed last. However, the display switches to the panoramic view and wide front view screen if the shift lever is not in P or R after the engine switch is turned from off to on (IG).




ii.

The automatic display mode automatically switches the display according to the vehicle status.

E453537E01
0.094,0.073 0.406,0.271 0.313,0.198 10 false *a 1.677,1.917 1.99,2.115 0.313,0.198 10 false *b 5.417,1.917 5.729,2.115 0.313,0.198 10 false *c 1.521,4.51 1.833,4.708 0.313,0.198 10 false *d 1.021,2.49 1.333,2.688 0.313,0.198 10 false 1 2.406,2.479 2.719,2.677 0.313,0.198 10 false 2 3.573,1.323 3.885,1.521 0.313,0.198 10 false 1 3.563,3.031 3.875,3.229 0.313,0.198 10 false 3 4.125,3.49 4.438,3.688 0.313,0.198 10 false 4 4.958,3.979 5.271,4.177 0.313,0.198 10 false 1

Text in Illustration
*a Shift lever not in P or R *b Panoramic view and wide front view screen
*c Two-side view screen *d Navigation screen, etc.

Screen Transition Conditions (Automatic Display Mode)
No. Screen Transition Conditions
(1) Panoramic view monitor switch (multi-terrain monitor switch) is pressed
(2) Current location switches, etc. on the display are pressed
(3) Vehicle speed changes from above approximately 10 km/h (6 mph) to approximately 10 km/h (6 mph) or lower. The screen that was last displayed is displayed on the display.*
(4) Vehicle speed changes from approximately 12 km/h (7 mph) or lower to above approximately 12 km/h (7 mph)

*: The panoramic view and wide front view screen is the first screen displayed after the engine switch was turned off.




c.

When the outer rear view mirror assembly is retracted

i.

When the outer rear view mirrors are retracted, the screen changes according to the current screen display, as follows.

E453538E01
0.323,0.135 0.635,0.333 0.313,0.198 10 false *a 0.292,1.656 0.604,1.854 0.313,0.198 10 false *b 0.292,3.104 0.604,3.302 0.313,0.198 10 false *c 4.677,0.156 4.99,0.354 0.313,0.198 10 false *d 4.667,1.688 4.979,1.885 0.313,0.198 10 false *e 4.677,3.104 4.99,3.302 0.313,0.198 10 false *f 3.521,1.01 3.833,1.208 0.313,0.198 10 false 1 3.51,2.5 3.823,2.698 0.313,0.198 10 false 1 3.521,3.99 3.833,4.188 0.313,0.198 10 false 1

Text in Illustration
*a Panoramic view and wide front view screen *b Panoramic view and rear view screen
*c Two side view screen (Outer rear view mirror assembly is extracted) *d Side view and wide front view screen
*e Side view and rear view screen *f Two side view screen (Outer rear view mirror assembly is retracted)

Screen Transition Conditions
No. Screen Transition Conditions
(1) When outer rear view mirror assembly is retracted




Multi-terrain Monitor Screen Description (OFF LOAD)


a.

Manual display mode

i.

When the shift lever is moved to R, the screen switches depending on the previously displayed screen.

Example
E453539E01
3.729,4.198 3.896,4.198 3.896,4.198 4.333,3.583 true 2.729,6.448 2.896,6.448 2.896,6.448 3.75,6.083 true 0.104,0.094 0.417,0.292 0.313,0.198 10 false *a 4.188,1.844 4.5,2.042 0.313,0.198 10 false *b 4.656,4.031 4.969,4.229 0.313,0.198 10 false *c 4.656,6.219 4.969,6.417 0.313,0.198 10 false *d 1.552,1.813 1.865,2.01 0.313,0.198 10 false *e 3.563,4.104 3.875,4.302 0.313,0.198 10 false *f 2.583,6.385 2.896,6.583 0.313,0.198 10 false *f 2.917,0.625 3.073,0.823 0.156,0.198 10 false 1 6.052,1.042 6.594,1.281 0.542,0.24 10 false 7 and 9 4.906,2 5.448,2.24 0.542,0.24 10 false 7 5.365,4.333 5.906,4.573 0.542,0.24 10 false 7 or 8 3.833,4.292 4.375,4.531 0.542,0.24 10 false 7 or 8 6.26,5.646 6.802,5.885 0.542,0.24 10 false 7 and 9 1.948,5.656 2.104,5.854 0.156,0.198 10 false 3 2.469,3.333 2.625,3.531 0.156,0.198 10 false 2 2.823,1.417 3.104,1.906 0.281,0.49 10 false 4, 5 or 6

Text in Illustration
*a Shift lever in R *b Front view and two-side view screen
*c Rear view and two-side view screen *d Wide rear view screen
*e Navigation screen, etc. *f Display mode switching button

Screen Transition Conditions
No. Screen Transition Conditions
(1) Shift lever is moved to R and panoramic view monitor switch (multi-terrain monitor switch) is pressed
(2) Shift lever is moved to R (ended with display of screen other than wide rear view screen previously)
(3) Shift lever is moved to R (ended with display of wide rear view screen previously)
(4) Shift lever is moved to P
(5) Physical switches of display are operated
(6) Shift lever is moved to other than P or R
(7) Panoramic view monitor switch (multi-terrain monitor switch) is pressed
(8) Display mode switching button is pressed
(9) Vehicle speed changes to approximately 12 km/h or more



b.

Auto display mode

i.

The automatic display mode automatically switches the display according to the vehicle status.

E453540E01
1.417,2.333 1.583,2.333 1.583,2.333 1.875,3.583 true 4.667,2.25 4.833,2.25 4.833,2.25 5.125,3.5 true 0.958,6.583 1.125,6.583 1.125,6.583 1.75,5.833 true 4.125,6.583 4.292,6.583 4.292,6.583 4.917,5.833 true 1.135,1.823 1.448,2.021 0.313,0.198 10 false *a 2.469,2.042 2.781,2.24 0.313,0.198 10 false 1 0.5,3.458 0.813,3.656 0.313,0.198 10 false 2 2.125,4.063 2.438,4.26 0.313,0.198 10 false *b 2.156,6.323 2.469,6.521 0.313,0.198 10 false *c 5.427,4.104 5.74,4.302 0.313,0.198 10 false *d 5.427,6.313 5.74,6.51 0.313,0.198 10 false *e 1.948,4.375 2.583,4.646 0.635,0.271 10 false 3, 4 or 5 5.188,4.417 5.823,4.688 0.635,0.271 10 false 3, 4 or 5 3.813,2.823 4.125,3.021 0.313,0.198 10 false 6 3.833,3.646 4.146,3.844 0.313,0.198 10 false 7 3.813,5.771 4.125,5.969 0.313,0.198 10 false 7 3.823,4.948 4.135,5.146 0.313,0.198 10 false 6 4.531,2.167 4.75,2.396 0.219,0.229 10 false *f 1.25,2.25 1.469,2.479 0.219,0.229 10 false *f 0.75,6.521 0.969,6.75 0.219,0.229 10 false *f 3.948,6.521 4.167,6.75 0.219,0.229 10 false *f

Text in Illustration
*a Navigation screen, etc. *b Front view and two-side view screen
*c Front view and side view front tires screen *d Under floor view and side view screen
*e Under floor view and side view front tires screen *f Under floor view switching button

Screen Transition Conditions
No. Screen Transition Conditions
(1) Shift lever is moved to position other than R and panoramic view monitor switch (multi-terrain monitor switch) is pressed (did not end with display of front view and side view front tires screen previously)
(2) Shift lever is moved to position other than R and panoramic view monitor switch (multi-terrain monitor switch) is pressed (ended with display of front view and side view front tires screen previously)
(3) Front view screen is touched
(4) Side view screen is touched
(5) Panoramic view monitor switch (multi-terrain monitor switch) is pressed
(6) Under floor view switching button is pressed when vehicle is parked and vehicle position can be estimated
(7) Vehicle speed is approximately 5 km/h (3 mph) or less and vehicle position cannot be estimated or under floor view switching button is pressed




OPERATION EXPLANATION


a.

The reverse position signal is sent from the shift lever position switch to the parking assist ECU when the shift lever is moved to R.


b.

An appropriate steering angle and timing information can be provided for the driver. This is based on the information from the steering angle sensor signal and the vehicle angle data signal that are sent to the parking assist ECU.

HINT:

The steering angle sensor signal is used to control parking assist only for estimated guide line mode.




COMMUNICATION SYSTEM OUTLINE


a.

CAN communication system

i.

The multi-terrain monitor system uses CAN communication for data communication between the parking assist ECU and other ECUs and between the parking assist ECU and each camera.


ii.

If a problem occurs in the CAN communication line, the parking assist ECU outputs a CAN communication malfunction DTC. (To check, use the GTS.) (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>MULTI-TERRAIN MONITOR SYSTEM>DTC CHECK / CLEAR)


iii.

If a problem occurs in the CAN communication line, the parking assist ECU outputs a CAN communication malfunction DTC. (To check, use the display diagnosis screen.)

See pagePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (w/ Central Gateway ECU)>DIAGNOSIS SYSTEM


iv.

If a CAN communication line malfunction DTC is output, repair the malfunction in the communication line and troubleshoot the multi-terrain monitor system when data communication is normal.


v.

Since the CAN communication line has its own length and route, it cannot be repaired temporarily with a bypass wire, etc.




VIDEO SIGNALS


a.

Video signal circuit

E381376E03
0.24,1.417 2.417,1.625 2.177,0.208 10 false Front Television Camera Assembly 0.156,5.208 2.531,5.438 2.375,0.229 10 false Side Television Camera Assembly RH 0.198,7.01 2.354,7.281 2.156,0.271 10 false Rear Television Camera Assembly 0.146,3.281 2.5,3.521 2.354,0.24 10 false Side Television Camera Assembly LH 2.99,6.948 4.281,7.156 1.292,0.208 10 false Parking Assist ECU 0.927,8.333 2.49,8.542 1.563,0.208 10 false : Analog Display Signal 0.917,7.979 2.563,8.177 1.646,0.198 10 false : Display Signal Direction 4.583,3 7.01,3.229 2.427,0.229 10 false Radio and Display Receiver Assembly

i.

Video signals from the front television camera assembly are input into the parking assist ECU via analog communication lines (vehicle wire harness).


ii.

Video signals from the side television camera assembly LH are input into the parking assist ECU via analog communication lines (vehicle wire harness).


iii.

Video signals from the side television camera assembly RH are input into the parking assist ECU via analog communication lines (vehicle wire harness).


iv.

Video signals from the rear television camera assembly are input into the parking assist ECU via analog communication lines (vehicle wire harness).


v.

Video signals from the parking assist ECU are input into the radio and display receiver assembly via analog communication lines (vehicle wire harness).



b.

Screen display

i.

Video signals input from each camera are processed in the parking assist ECU and displayed on the radio and display receiver assembly as the multi-terrain monitor system screen.




DIAGNOSTIC FUNCTION OUTLINE


a.

This multi-terrain monitor system has a diagnostic function displayed in the radio and display receiver assembly. This function enables the calibration (adjustment and verification) of the multi-terrain monitor system.


b.

The multi-terrain monitor system can check the following items by using the GTS.

Item Proceed to
DTC (Click here)
Data List / Active Test (Click here)



CALIBRATION


a.

Use the multi-terrain monitor system diagnosis screen for calibration and checking of the multi-terrain monitor system (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>MULTI-TERRAIN MONITOR SYSTEM>DIAGNOSIS SYSTEM).

NOTICE:

Part replacement and work performed during servicing may require calibration of the multi-terrain monitor system and other systems (See page General>SETUP>WHEN REPLACING OR REMOVING/INSTALLING PARTS>WORK PROCEDURE).